JVC UX-A52R Adjusting the Volume, Turning On/Off the Key-touch Tone, Reinforcing the Bass Sound

Page 17

Continued

Adjusting the Volume

You can adjust the volume level while the unit is turned on. The volume level has no effect on recording.

To increase the volume, press VOLUME +.

To decrease the volume, press VOLUME –.

(Maximum)

(Minimum)

The volume level meter appears on the display.

•The volume level can be adjusted in 41 steps (VOL MIN, VOL 1 – VOL 39, and VOL MAX.)

•When pressing and holding the button, you can change the volume level continuously.

For private listening

Connect the headphones to the PHONES jack. No sound comes out of the speakers. Be sure to turn down the volume before connecting or putting on the headphones.

DO NOT turn off (on standby) the unit with the volume set to an extremely high level; otherwise, the sudden blast of sound can damage your hearing, speakers and/or headphones when you turn on the unit or start playing any source.

REMEMBER you cannot adjust the volume level while the unit is on standby mode.

Turning On/Off the Key-touch Tone

If you do not want the key-touch tone to beep each time you press buttons, you can deactivate it while the unit is turned on.

On the remote control ONLY:

Press BEEP.

•Each time you press the button, the key-touch tone turns on (BEEP ON) and off (BEEP OFF) alternately:

BEEP ON BEEP OFF

Reinforcing the Bass Sound

The richness and fullness of the bass sound is clearly maintained regardless of how low you set the volume— Active Hyper Bass PRO. You can select the bass effect levels while the unit is turned on. The AHB PRO can be applied only to playback sounds, and cannot be used for recording.

To get the effect, press AHB PRO.

The AHB PRO indicator lights on the display.

•Each time you press the button, the effect changes as

follows:

AHB 1 AHB 2

AHB OFF

(Canceled)

AHB 1: Bass sound is clearly heard even in the low volume.

AHB 2: Bass sound is more effective than AHB 1.

AHB OFF: Cancels the AHB PRO.

The AHB PRO indicator goes off from the display.

To check the AHB PRO setting currently selected, press AHB PRO once while the AHB PRO indicator is lit.

Selecting the Sound Modes

You can select one of the 4 preset sound modes while the unit is turned on. The sound modes can be applied only to playback sounds, and cannot be used for recording.

On the remote control ONLY:

To select the sound modes, press SOUND MODE repeatedly until the sound mode you want appears on the display.

The SOUND indicator also lights on the display.

• Each time you press the button, the sound mode changes as follows:

ROCK POP CLASSIC

FLAT JAZZ (Canceled)

ROCK: Boosts low and high frequency. Good for acoustic music.

POP: Good for vocal music or voice.

CLASSIC: Good for classical music.

JAZZ: Good for jazz music.

FLAT: Cancels the sound mode.

The SOUND indicator goes off from the display.

To check the sound mode currently selected, press SOUND MODE once while the SOUND indicator is lit.

– 12 –

Page 16 Page 18
Image 17
Page 16 Page 18
Contents UX-A52R- Consists of CA-UXA52R and SP-UXA52 Micro Component SystemIf in Doubt Consult a Competent Electrician UX-A52R Class Laser Product Above ALL Introduction PrecautionsContents Location of the Buttons Display-indicatorsMain Unit Become familiar with the buttons on your unitMain unit Remote control Remote ControlCD 3 ¥ 8 play/pause button 11, 21 AUX/MD button 11Unpacking Putting the Batteries into the Remote ControlGetting Started FM antenna Connecting AntennasTo connect an outdoor FM antenna AM MW/LW antennaTo connect speakers Connecting SpeakersTo remove the speaker grilles To attach the speaker grille, put the projectionsTo stop and cancel the display demonstration, press Connecting Other EquipmentTo connect analog audio equipment For playing the other equipment through this unitMain unit Front view Basic and Common OperationsMain unit Top view Selecting the Sources and Starting Play Turning On the PowerTurning On/Off the Key-touch Tone Adjusting the VolumeReinforcing the Bass Sound Selecting the Sound ModesTo adjust and register the color Setting the Display IlluminationTo select the color pattern To select TODAY’S ColorListening to FM and AM MW/LW Broadcasts To change the FM reception mode Tuning in a StationPresetting Stations Receiving FM Stations with RDS Tuning in a Preset StationChanging the RDS Information Searching for Programs by PTY Codes PTY SearchSwitching to a Program Type of Your Choice Temporarily More about the Enhanced Other Networks function Alarm functionTest function Description of the PTY codes Playing Back a CD Playing Back the Entire CD-Normal Play Precautions on CD PlaybackBasic CD Operations To modify the program To check the program contentsProgram Play Playing at Random-Random Play On the remote control only Load a CD Press CD 3/ 8, thenRepeating Tracks-Repeat Play To skip the current track, press ¢Display Playing Back a TapeTo check the clock time while playing back a tape To play both sides-Reverse ModePlaying Back a Tape Mode PRO Using External EquipmentRecording from This Unit to External Equipment Listening to External EquipmentPress AUX/MD Play the CD Player of this unitFor recording operations, mainly use the buttons on the unit Recording on TapesTo protect your recordings Before You Start RecordingTo keep the best recording and playback sound quality To demagnetize the headRecording FM/AM MW/LW Broadcasts What’s a Recording Mode and Reverse Mode ?Source is changed to AUX Recording External EquipmentTo record a single track during play or pause SET Using the TimersHow Recording Timer actually works Setting the ClockUsing Recording Timer How Daily Timer actually works Using Daily TimerPress SET When you have selected from FM or To turn off the Recording Timer after its setting is doneHour digit of timer-off time starts flashing on Timer-on time, then press SETTimer-off time, then press SET Minute digit of timer-off time starts flashing onHow Sleep Timer actually works Using Sleep TimerTimer Priority Cleaning the unit MaintenanceGeneral Notes Handling discsSpecifications JVC 1101MWMMDWJEM
Related manuals
Manual 48 pages 2.4 Kb

UX-A52R specifications

The JVC UX-A52R is a compact micro stereo system designed for music enthusiasts seeking quality sound in a space-efficient package. This model stands out for its blend of vintage design and modern technology, making it an appealing choice for various users, from casual listeners to dedicated audiophiles.

One of the standout features of the UX-A52R is its powerful audio output. With an impressive 60 watts of RMS power, the system delivers clear and dynamic sound, ensuring that even the most intricate musical details are preserved. The system features a dual speaker configuration, which enhances the stereo imaging and provides a richer listening experience. The speakers are designed to minimize distortion, allowing for consistent sound quality across various genres.

The UX-A52R is equipped with a CD player that supports various disc formats, including CD-RW, allowing users to enjoy their favorite albums. Additionally, it includes an FM/AM tuner with 30 preset stations, providing easy access to both local and national radio stations.

In terms of modern functionality, the JVC UX-A52R features an auxiliary input, enabling users to connect external devices such as smartphones or tablets. This versatility extends the system's capabilities, making it suitable for streaming music directly from digital devices. Moreover, the unit includes a headphone jack for private listening, enhancing its utility for personal use.

Another noteworthy characteristic of the JVC UX-A52R is its user-friendly design. The front panel features a bright, easy-to-read LCD display that shows track information and station frequencies, improving navigation through settings and selections. The included remote control offers added convenience, allowing users to adjust volume, skip tracks, and change inputs without getting up from their seat.

The design of the UX-A52R is also appealing, with a sleek, modern aesthetic that complements any home decor. The system is compact enough to fit comfortably on a shelf or desktop, making it an excellent choice for smaller spaces.

In summary, the JVC UX-A52R is an impressive micro stereo system that combines excellent sound quality, modern connectivity options, and a user-friendly interface. Its powerful audio output and versatile features make it an ideal choice for anyone seeking a quality music experience in a compact form factor. Whether you're enjoying your favorite CDs or streaming music from your device, the UX-A52R delivers a satisfying auditory experience.
Top Page Image Contents