JVC UX-A52R manual Connecting Other Equipment, To connect analog audio equipment

Page 14

Connecting Other Equipment

You can connect both of the analog and digital equipment. When you connect and use the equipment, refer also to its manual supplied.

•DO NOT connect other equipment while the power is on.

•DO NOT plug in any equipment until all connections are complete.

To connect analog audio equipment

Be sure that the plugs of the audio cords and the jacks on the rear of the unit are color-coded: White plugs and jacks are for left audio signals, and red ones for right audio signals.

 

LINE IN

 

(AUX)

R

L

SPEAKER IMPEDANCE

MIN 4

R

L

AC IN

 

Analog audio

 

equipment

 

 

To output

For playing the other equipment through this unit,

connect between the audio output jacks on the other equipment and the LINE IN (AUX) jacks by using an audio cord (not supplied.)

To connect audio equipment with an optical digital input terminal

You can record CD sound onto the connected digital equipment.

Connect an optical digital cord (not supplied) between the optical digital input terminal on the other equipment and the OPTICAL DIGITAL OUT terminal.

OPTICAL DIGITAL OUT

Protective cap

terminal

 

Before connecting the other equipment, remove the protective cap from the terminal.

Audio equipment with an optical digital input

NOW, you can plug the AC power cord.

IMPORTANT: Be sure to check all connections to be done before plugging the AC power cord into a wall outlet.

 

SPEAKER IMPEDANCE

 

 

MIN 4

 

R

L

AC power cord

 

(supplied)

 

 

AC IN

 

2

1 To the AC IN terminal

To a wall outlet

 

When connecting the AC power cord into a wall outlet, the unit automatically starts the display illumination.

To stop and cancel the display demonstration, press

COLOR during display illumination—while the unit is turned off (on standby.)

To start the display illumination manually, press

COLOR again while the unit is turned off (on standby.)

– 9 –

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Micro Component System UX-A52R- Consists of CA-UXA52R and SP-UXA52If in Doubt Consult a Competent Electrician UX-A52R Class Laser Product Above ALL Precautions IntroductionContents Main Unit Display-indicatorsLocation of the Buttons Become familiar with the buttons on your unitMain unit CD 3 ¥ 8 play/pause button 11, 21 Remote ControlRemote control AUX/MD button 11Unpacking Putting the Batteries into the Remote ControlGetting Started To connect an outdoor FM antenna Connecting AntennasFM antenna AM MW/LW antennaTo remove the speaker grilles Connecting SpeakersTo connect speakers To attach the speaker grille, put the projectionsTo connect analog audio equipment Connecting Other EquipmentTo stop and cancel the display demonstration, press For playing the other equipment through this unitMain unit Front view Basic and Common OperationsMain unit Top view Turning On the Power Selecting the Sources and Starting PlayReinforcing the Bass Sound Adjusting the VolumeTurning On/Off the Key-touch Tone Selecting the Sound ModesTo select the color pattern Setting the Display IlluminationTo adjust and register the color To select TODAY’S ColorListening to FM and AM MW/LW Broadcasts To change the FM reception mode Tuning in a StationPresetting Stations Changing the RDS Information Tuning in a Preset StationReceiving FM Stations with RDS Searching for Programs by PTY Codes PTY SearchSwitching to a Program Type of Your Choice Temporarily More about the Enhanced Other Networks function Alarm functionTest function Description of the PTY codes Playing Back a CD Precautions on CD Playback Playing Back the Entire CD-Normal PlayBasic CD Operations To modify the program To check the program contentsProgram Play Repeating Tracks-Repeat Play On the remote control only Load a CD Press CD 3/ 8, thenPlaying at Random-Random Play To skip the current track, press ¢Playing Back a Tape DisplayTo check the clock time while playing back a tape To play both sides-Reverse ModePlaying Back a Tape Using External Equipment Mode PROPress AUX/MD Listening to External EquipmentRecording from This Unit to External Equipment Play the CD Player of this unitRecording on Tapes For recording operations, mainly use the buttons on the unitTo keep the best recording and playback sound quality Before You Start RecordingTo protect your recordings To demagnetize the headWhat’s a Recording Mode and Reverse Mode ? Recording FM/AM MW/LW BroadcastsSource is changed to AUX Recording External EquipmentTo record a single track during play or pause Using the Timers SETHow Recording Timer actually works Setting the ClockUsing Recording Timer Press SET When you have selected from FM or Using Daily TimerHow Daily Timer actually works To turn off the Recording Timer after its setting is doneTimer-off time, then press SET Timer-on time, then press SETHour digit of timer-off time starts flashing on Minute digit of timer-off time starts flashing onHow Sleep Timer actually works Using Sleep TimerTimer Priority General Notes MaintenanceCleaning the unit Handling discsSpecifications JVC 1101MWMMDWJEM
Related manuals
Manual 48 pages 2.4 Kb

UX-A52R specifications

The JVC UX-A52R is a compact micro stereo system designed for music enthusiasts seeking quality sound in a space-efficient package. This model stands out for its blend of vintage design and modern technology, making it an appealing choice for various users, from casual listeners to dedicated audiophiles.

One of the standout features of the UX-A52R is its powerful audio output. With an impressive 60 watts of RMS power, the system delivers clear and dynamic sound, ensuring that even the most intricate musical details are preserved. The system features a dual speaker configuration, which enhances the stereo imaging and provides a richer listening experience. The speakers are designed to minimize distortion, allowing for consistent sound quality across various genres.

The UX-A52R is equipped with a CD player that supports various disc formats, including CD-RW, allowing users to enjoy their favorite albums. Additionally, it includes an FM/AM tuner with 30 preset stations, providing easy access to both local and national radio stations.

In terms of modern functionality, the JVC UX-A52R features an auxiliary input, enabling users to connect external devices such as smartphones or tablets. This versatility extends the system's capabilities, making it suitable for streaming music directly from digital devices. Moreover, the unit includes a headphone jack for private listening, enhancing its utility for personal use.

Another noteworthy characteristic of the JVC UX-A52R is its user-friendly design. The front panel features a bright, easy-to-read LCD display that shows track information and station frequencies, improving navigation through settings and selections. The included remote control offers added convenience, allowing users to adjust volume, skip tracks, and change inputs without getting up from their seat.

The design of the UX-A52R is also appealing, with a sleek, modern aesthetic that complements any home decor. The system is compact enough to fit comfortably on a shelf or desktop, making it an excellent choice for smaller spaces.

In summary, the JVC UX-A52R is an impressive micro stereo system that combines excellent sound quality, modern connectivity options, and a user-friendly interface. Its powerful audio output and versatile features make it an ideal choice for anyone seeking a quality music experience in a compact form factor. Whether you're enjoying your favorite CDs or streaming music from your device, the UX-A52R delivers a satisfying auditory experience.
Top Page Image Contents