Sec1:4-Sec1:5
SETTING UP YOUR PEDOMETER
ACCUSPLIT products use a common setting procedure, S1-
Press S1 for 2 seconds: Enter the SET mode
Press S2: Change the field to be set
Press S3: Change the field value
Press S4 for 2 seconds: Exit the SET mode
4
Setting the Clock
STEP count
8722
5:18 2.04Mile/h
Clock
Speed
The clock must be set in order for the memory’s automatic rollover function to work correctly.
5
Sec1:6-Sec1:7
| 1. | Repeatedly press the yellow MODE button until the | 4. | S2: Press the yellow S2 (MODE) button to switch from |
|
|
| ||||
|
| pedometer displays the current step count. (The |
| the HOUR display to the MINUTE display.The MINUTE |
|
|
| display will show a line underneath the word “STEP” |
| display will start to blink. |
|
|
| on the label.) | 5. | S3: Press the S3 ▲ (MEMORY) button to increase the |
|
| 2. | S1: Press and hold the yellow S1 (MODE) button for 2 |
| MINUTE display. Press the S3 ▼ (RESET) button to |
|
|
| seconds.The HOUR display will start to blink, showing |
| decrease the MINUTE display. Hold the button down to |
|
|
| that you’ve entered SET mode. |
| change minutes quickly. |
|
| 3. | S3: Press the S3 ▲ (MEMORY) button to increase the | 6. | S2: Press the yellow S2 (MODE) button again to enter |
|
|
| HOUR display. Press the S3 ▼ (RESET) button to de |
| WEIGHT setting mode. |
|
|
| crease the HOUR display. Hold the button down to |
|
|
|
|
| change hours quickly. PM hours are displayed in |
|
|
|
|
| military time (1:00 PM is 13:00, 2:00 PM is 14:00, etc.). |
|
|
|
| 6 |
|
| 7 |
|
|
|
|
|
|
|
|
|
|
|
|
|