Suunto D3 manual

Page 42

3.Press S to change the selection in the following sequence: ->On/OFF status -> hours -> minutes

4.While the alarm status [On/OFF] is selected (blinking) press + or - to change the status. When the alarm status is On, the daily alarm indicator (-symbol) in the bottom right corner of the display indicates that the alarm is on.

5.Set the other sections as follows:

•While any other digits (except alarm status) are selected (blinking), press + to increase the value or - to decrease it. Holding down either button starts the scrolling of the current selection.

•The 12-hour or 24-hour format of the alarm matches the format of the time- keeping display, which is selected in the Time Adjustment Mode (see chapter 4.1.). When using the 12-hour format of the alarm, take care to set the time cor- rectly as morning (AM) or afternoon (PM).

6.After you have set the daily alarm, press the M button to save the settings and to return to the Setting Mode [SET].

40

Image 42

Contents USER’S Guide Suunto Definition of WARNINGS, Cautions and Notes COPYRIGHT, Trademark and Patent NoticePage Page Page Table of Contents Set Gauge Mode Surface Interval After a Gauge divePage Safety Precautions IntroductionChoice of Diving and Watch Modes Emergency Ascents FreedivingPush buttons of the D3 Push Buttons Getting AcquaintedFunctions D3 is controlled with four push buttons as follows see FigPage Water Contacts Water contact and depth sensorTime Mode Time Timekeeping DisplayEither the date a, the seconds of the current time Stopwatch Timer UP Stopwatch displays hours, minutes and secondsPage Downtimer Timer D Gauge Dive Mode selected Diving with the D3Startup II. Battery Power Indicator Before Diving Activation and PRE-CHECKSBattery Power Indicator and LOW Battery Warning Battery Power Indicator Display OperationUser Definable Functions and Alarms Presetting Dive Alarms Bookmark FunctionFreediving Before Diving in the Free Mode Presetting the Displays in the Free ModeDuring the Freedive Freediving DAY History 12. Freediving Day HistorySurface Interval After a Freedive Gauge Diving Maximum Operating Depth Planner MOD Presetting the Displays in the Gauge Mode Basic Dive Data 17. Dive has just begunAscent Rate Indicator Ascent Rate IndicatorSurface Interval After a Gauge Dive Dive Numbering Flying After Diving 8000 ft. The only two exceptions to this recommendation areAudible and Visual Alarms Dive computer automatically returns to the Time ModeSetting Mode is indicated by the SET text and mode indicator Current time blinks for one minute, if no button is pressed Setting Mode SET Setting TIME, Date and Dual Time TimeYear, month and day are selected. Daily Alarm Setting ALM Daily Alarm Setting ModePage Timer Settings Timer D Timer Setting ModeDive Mode Settings Dive SET Gauge ModeLected dive mode Gauge or Free is displayed Fig GaugeSET Free Mode Dive Alarm Settings Dive AL To set the depth alarmMAX Dive Time Unit Adjustment Settings AdJ Memory Mode Memory and Data Transfer MEMLogbook Memory Mode Logbook and Dive Profile Memory LOGFollowing information will be shown on four pages Maximum depth Total dive timeIII Fig Dive Profile Memory PRO Dive History Memory HIS Dive History Memory10. Free Dive History Memory Data Transfer and PC-INTERFACE TR-PC 11. Data Transfer and PC- Interface SUUNTOSPORTS.COM System RequirementsMY Suunto Communities Sport ForumsGetting Started Care and Maintenance Care of Your D3Maintenance Water Resistance Inspection Battery Replacement Battery KITBattery Replacement Thoroughly rinse and dry the computerPage Technical Specification Technical DescriptionRecording interval in Free mode 1 seconds Memory capacity Onds, records the maximum depth of each intervalLife expectancy at 20C 68F with 1 minute Free dives Dives/y Page Warranty Page DAN GlossaryASC Rate DCIEAN MODNitrox NoaaPO2 Surf Time Page Page Page Disposal of the Device CopyrightModes and Operations Store Country TWO Year Warranty Made in Finland Suunto Oy 06 / 2004, 03