Suunto D3 manual Logbook and Dive Profile Memory LOG, Logbook Memory Mode

5.1.LOGBOOK AND DIVE PROFILE MEMORY [LOG]

This instrument has a sophisticated high capacity Logbook and Profile Memory. The data is recorded to the profile memory based on the sampling rate. The sampling rate in Gauge mode is adjustable to 10, 20, 30 and 60 s, and in Free mode 1 s. Dives shorter than the recording interval are not registered.

To enter the Logbook Memory Mode:

1.In the Memory Mode [MEM], press S to select the Logbook Memory Mode (Fig. 5.2.). The LOG text appears at the bottom of the display to indicate the selected mode.

2.Wait two seconds until the Logbook Memory Mode activates automatically. For each dive there are four pages of logbook dive information.

3.Press S to switch the display between Logbook display I, II, III and IV.

The data of the most recent dive is shown first. The END text is displayed after the oldest and most recent dive. (Fig. 5.7.)

F

R

E

E

C

S

A

Fig. 5.2. Logbook Memory Mode.

F

R

E

E

C

S

A

Fig. 5.3. Logbook, Page I.

49