LAPS AND SPLITS
LAPS AND SPLITS
The chrono (stopwatch) is used to time an event, like a race. The total time and any intermediate times may be stored and later recalled.
Normally, the watch simply displays the total running time. If you wish to view and store intermediate times (“splits”), the watch will display lap times and split times. These are illustrated in the example below for a workout consisting of four laps around a track.
LAP 1 | LAP 2 | LAP 3 | LAP 4 |
7:11 MIN | 7:50 MIN | 7:08 MIN | 7:30 MIN |
7:11 MIN
SPLIT 1
15:01 MIN
SPLIT 2
22:09 MIN
SPLIT 3
29:40 MIN
SPLIT 4
Lap time: The time since the previous split.
Split time: The time from the start to the split.
(Notice the lap and split time are the same for lap 1.)
26 | Note: You can stop timing by pressing ●▲ and continue by pressing | ●▲.The | |
time that the chrono is stopped will not be included in the lap or split times. | |||
| |||
TO RECORD LAP AND SPLIT TIMES |
| START OF EVENT | ||
1. | In chrono (stopwatch) mode, press ●▲ | at the start of your | ||
| event/training session. |
|
| |
2. | Press | ●▲ to take a split. The upper display will show the lap | ||
| time, lower display will freeze temporarily to show the split | |||
| time. (After 10 secs your watch will resume showing the current | |||
| lap and split times on the display.) |
|
| |
3. | Press | ●▲ for each additional split (up to 8 laps/splits may be stored). | ||
4. | Press | ●▲ to stop the chrono (stopwatch) at the end of the event/training | ||
| session. |
|
| |
TO RECALL LAPS AND SPLITS
Pressing the F button in chrono (stopwatch) mode will allow you access (recall) laps stored. Press ●▲ repeatedly to see the laps and splits. (Your best lap will be shown first. This is the shortest time.)
LAP TIME
SPLIT TIME
The lap time is at the top of the display and the split time is shown below.
27