GETTING STARTED
1 Install the Watch Battery
Step 1: Peel Off Battery Protector
The battery has a protective covering and will not work unless the covering is removed. Simply peel off the covering using the tab and let the battery breathe (vent holes facing upwards) for 2 minutes before putting it into the watch.
Remove battery protector
Wait 2 minutes
Step 4: Replace Battery Lid
Replace the battery lid. Turn clockwise to close.
Battery Type: Size 675
The battery is a size 675 common
675 battery cell recommended.
Replace battery lid
Step 2: Remove Battery Lid
To remove the battery lid, turn the lid counterclock- wise by pushing against the raised portion of lid with fingers.
Remove battery lid
2 | Use the SkyTel Services Guide to Connect |
With SkyTel |
Open the enclosed activation guide. Review the materials. Call SkyTel and set up your paging service.
3 Set the Time on Your Watch
2
Step 3: Place Battery in Watch
Place the battery in the battery compartment
+(positive side) facing up.
IMPORTANT: Please remove expired batteries to prevent leakage.
Place battery in watch
With FLEXtime (see page 8), your watch will receive the time and date through the pager and automatically set itself. Or set it manually, (see pages
4 Get to Know Your Watch Features
Open the chart on the inside back cover to get an overview of the watch modes and functions.
3