Timex M828 specifications Memory BACK-UP, About the Battery, Battery Indicators

Page 19

BATTERY

ABOUT THE BATTERY

The battery is a size 675 common zinc-air hearing aid battery, not a watch battery. Expected battery life will vary depending on watch and pager usage. Battery life is approximately 2 months.

675 battery cell recommended.

BATTERY INDICATORS

”Lo Battery“:

Lo Battery will appear on the face of the watch every 2 seconds to indicate the battery is running low. Some of the watch‘s non-pager functions will be disabled, such as the INDIGLO night-light and all alerts will be shortened. You will continue to receive pages and be able to read them. The watch will continue to operate in this condition for a limited time after the appearance of the ”Lo Battery“ message.

What to do if ”Lo Battery“ appears:

Install a new battery as soon as possible following the instructions illustrated on page 2.

Important: Remove expired cells promptly to avoid leakage.

MEMORY BACK-UP

INFORMATION BACKUP WHEN CHANGING A BATTERY:

When you remove and replace the zinc-air battery in the Timex Internet Messenger watch, your valuable settings and messages are preserved by a special data back-up feature in the memory of the watch. So, time of day and date and alarm settings and messages are automatically saved:

1.Once per day, or

2.When you lock/unlock a message, or

3.When you read any message or change a pager setting when

"LO BATTERY" is displayed on the watch display when in time of day mode, or

4.When you change an alarm or time setting.

Please try to replace your battery within a minute to ensure time of day accuracy. However, even if it takes several minutes or hours to replace the battery, the FLEXtime feature (if available in your area), will correctly set time and date once the battery is installed. Allow approximately 4 minutes for FLEXtime to update your time.

34

35

Image 19
Contents Page Provides convenient, on-the-wrist info Table of ContentsGetting STARTED/BATTERY Installation Watch Features TopicGetting Started Replace the battery lid. Turn clockwise to closeChrono stopwatch again Return to Time of Day mode againTime of day is the main display Shown on the watch. Press Time of Day PagerTime of day mode, your watch looks like this HOW to Read the WatchFlextime Explanation Watch SettingsFollowing SettimewatchHourly chime Button beep Scroll speed Return to time of day Manual setting is not required when FLEXtime is usedReturn to Time of Day See beginning of loop on By a silent vibrate alert When viewing You mayDisplays a pager status Has a pager mode whichMessage screen DUP Duplicate message same message received more than once Additional Pager FeaturesRead the info feed Auto ON/OFF Reading Information Service MessagesYour Internet Messenger Watch From Time of dayIT’S AS Easy AS 1…2…3 HOW to Send Content from the InternetSetting the Watch Alarms Weekday, weekend, weekly Monthly or yearly alarmsGo to alarm mode Selected alarmUsing the Chrono Stopwatch Basic Function From Time of day Go to chrono stopwatch modeStart the chrono stopwatch the symbol will appear Reset the chrono stopwatchTo take a split. The upper display will show the lap Laps and SplitsAt the start of your Event/training sessionExit recall function Chrono stopwatch symbol will appearStart the chrono stopwatch Stop the chrono stopwatchUsing the Timer From Time of day Go to timer modeStop the timer Reset the timerYou can custom set Timer for any time youUsing the Timer Custom SET Using the Timer QuicksetInformation Backup When Changing a Battery BatteryAbout the Battery Battery IndicatorsWater Resistance Please refer to the chart right for recommended usageWatch will chime on the hour see page 11 to activate Additional Watch FeaturesFor fastest service, billing or repair information call Warranty InformationFunctions Internet Messenger Watch Mode MAPWeb site Timex Info Contact InformationFor additional technical help please contact Help Desk International Internet MailFor more information, visit us at http//mobile.timex.com