Seiko 7S26 manual To Preserve the Quality of Your Watch, Temperatures

English

TO PRESERVE THE QUALITY OF YOUR WATCH

●Repair of diver’s watches requires special expertise and equipment. If you find that your diver’s watch is malfunctioning, therefore, never attempt to repair it but immediately send it to a nearby SEIKO Service Center.

■TEMPERATURES

Your watch works with stable accuracy within a temperature range of 5° C and

+60°C 35 ° C (41° F and 95° F).

-10°CTemperatures over 60° C (140 ° F) or below -10 ° C (+14° F) may cause a slight time loss or gain or shorten the duration within which the watch keeps operating. However, the above conditions will be corrected when the watch returns to normal temperature.

■MAGNETISM

■CHEMICALS

■PERIODIC CHECK

N S

Your watch will be adversely affected by strong magnetism. Keep it away from close contact with magnetic objects.

12

Be careful not to expose the watch to solvents, mercury, cosmetic spray, detergents, adhesives or paints. Otherwise, the case, bracelet, etc. may

b e c o m e d i s c o l o r e d , deteriorated or damaged.

2 - 3 Years

It is recommended that the watch be checked once every 2 to 3 years by an AUTHORIZED SEIKO DEALER or SERVICE CENTER to ensure that the case, crown, gasket and crystal seal remain intact.