Seiko 5J22, 5J32 manual Time Relay Function, Crown Pull out to the first click

Page 4

English

Manual power save function

 

The power save function can be activated manually. If you decide not to use the watch

 

 

for a long time, use this function to further conserve energy.

*While the second hand is moving at two-second intervals, the power save function cannot be activated manually. In this case, charge the watch referring to “ENERGY DEPLETION FOREWARNING FUNCTION”, and then, follow the procedure below.

CROWN Pull out to the first click.

* Pull out and push in within one second.

Push in to the normal position.

 

 

* The hands will stop as the power save function

 

is activated.

Note: If your watch has a screw lock type crown, turn the crown counterclockwise to unscrew it, and then, pull it out. After using the crown, push it back in to the normal position, and then, turn it clockwise to screw it in completely.

Caution:

Do not pull out the crown to the second click while the power save function is in operation. Otherwise, it is turned off, and the time data retained inside the watch will be erased, thus disabling the time relay function.

6

TIME RELAY FUNCTION

the watch, the time relay function is activated, and the hands are adjusted automatically to

English

While the power save function is working, the built-in IC continues to compute the time

 

 

though the hands have stopped. As a certain amount of electricity is generated by swinging

 

 

the time retained inside the watch.

 

If the watch is charged fully as the power save function is activated, the time relay function remains operable for approximately four years.

* The time period varies depending on the amount of power reserve stored in the KINETIC E.S.U.

How to activate the time relay function

Caution:

Do not pull out the crown to the second click before activating the time relay function. Otherwise, the time data retained inside the watch will be erased, thus disabling the time relay function.

Swing the watch from side to side for 2 to 3 seconds.

7

Image 4
Contents Cal J22, 5J32 Contents Power Save Function FeaturesMoving to minimize the electrical energy consumed Crown Pull out to the first click Time Relay FunctionSwing the watch from side to side for 2 to 3 seconds Remarks on using the time relay function HOW to SET the Time and Date Power Reserve in Your Seiko Kinetic Watch How to charge the watchPower reserve guideline for the Kinetic E.S.U Energy Depletion Forewarning FunctionPrecaution Precautions for those only wearing the watch occasionallyRemarks on the Kinetic E.S.U Specifications