Seiko 5J32, 5J22 Energy Depletion Forewarning Function, Power Reserve in Your Seiko Kinetic Watch

Page 7

ENERGY DEPLETION FOREWARNING FUNCTION

English

 

The watch has been charged fully at the factory, and the power save function will keep

 

 

the built-in IC computing the time for up to four years. Normally, therefore, it is not

 

necessary to charge the watch manually by swinging it. If you should find the second

 

hand moving at two-second intervals, however, charge the watch following the

 

procedure in “How to charge the watch”.

 

 

 

When the second hand starts moving at two-second intervals instead of the normal one-

 

second intervals, the watch will run down in approximately 12 hours.

 

If the second hand starts moving at two-second intervals when the power save function is

 

turned off by swinging the watch, the power reserve may have become depleted to an

 

extremely low level.

 

In those cases, charge the watch following the procedure below.

 

How to charge the watch

 

1. Swing the watch from side to side approximately 500 times.

 

* Swing rhythmically at a rate of twice a second.

 

* If the second hand still moves at two-second intervals after the watch is

 

swung 500 times, swing it further until the second hand moves at one-

 

second intervals.

 

2. Swing the watch approximately 200 times further to reserve

 

one day of power.

12

 

 

* It is not necessary to charge the watch fully, as it is charged automatically

 

 

while it is worn on your wrist.

English

Notes:

 

1. To charge the watch efficiently, swing the watch from side to side, making an arc of about 20 cm.

 

2.

No additional benefit is obtained by swinging the watch more quickly or with greater vigor.

 

3. When the watch is swung, the oscillating weight in the generating system rotates to drive the

 

 

mechanism. As it rotates, it gives out a sound, which is not a malfunction.

 

4.

The watch is equipped with a system to prevent overcharge. Even if it is further swung after being

 

 

fully charged, no malfunction will result.

 

5.

Wear the watch daily for at least 10 hours.

 

6.

Even if the watch is worn on your arm, it will not be charged while your arm is not in motion.

 

POWER RESERVE IN YOUR SEIKO KINETIC WATCH

The electric energy generated while the watch is worn on your wrist is stored in the KINETIC E.S.U. It is a power source completely different from conventional batteries for watches and does not require any periodical replacement.

Power reserve guideline for the KINETIC E.S.U.

You can estimate the power reserve accumulated in the KINETIC E.S.U. from the manner in which you wear the watch.

Using the manual power save function as often as possible is an effective way to conserve the power reserve.

13

Image 7
Contents Cal J22, 5J32 Contents Power Save Function FeaturesMoving to minimize the electrical energy consumed Crown Pull out to the first click Time Relay FunctionSwing the watch from side to side for 2 to 3 seconds Remarks on using the time relay function HOW to SET the Time and Date Energy Depletion Forewarning Function Power Reserve in Your Seiko Kinetic WatchHow to charge the watch Power reserve guideline for the Kinetic E.S.UPrecaution Precautions for those only wearing the watch occasionallyRemarks on the Kinetic E.S.U Specifications