Timex 866-095000 warranty Thank YOU for Purchasing Your Timex Watch, Extended Warranty, Indiglo

www.timex.com

W-90866-095000

THANK YOU FOR PURCHASING YOUR TIMEX WATCH.

EXTENDED WARRANTY

Available in U.S. only. Extend your warranty for an additional 4 years from date of purchase for $5. You can pay with AMEX, Discover, Visa or MasterCard by calling 1 800-448-4639 during normal business hours. Payment must be made within 30 days of purchase. Name, address, telephone number, purchase date, and 5-digit model number required. You can also

mail a check for $5 to: Timex Extended Warranty, P.O. Box 1676, Dept. EF, Little Rock, AR 72203.

Please read instructions carefully to understand how to operate your Timex watch.

Your model may not have all of the features described in this booklet.

FUNCTIONS

Real-time calendar clock, Second time zone, Countdown timer, Daily/weekday/weekend alarm, hourly chime, Chronograph with lap/split storage, INDIGLO® night-light with Night-Mode® Feature.

BASIC OPERATIONS

SET OR DONE (To save changes and exit setting

MODE OR NEXT (Proceed to next step)

START/SPLIT OR + (Increase value. Hold to increase rapidly.)

STOP/RESET OR – (Decrease value. Hold to decrease rapidly.)

INDIGLO

When setting, each button has a different function as indicated above. Watch face will indicate when button changes function.

Note: On your watch the day/date display may appear below the time display and the Indiglo button may be located at the 3 o’clock position.

DEMO

Press MODE until DEMO appears. This mode will allow you to view all the features of the watch. Each mode will appear for three seconds. Setting date will erase this feature. It will reappear when you change the battery.

TIME/DATE/HOURLY CHIME/TIME ZONE

1.In TIME mode, press and hold SET. Time zone will flash.

2.To set, push + or – to select first or second time zone.

3.Press NEXT. Hour digits flash.

4.Press + or – to change hour including AM/PM. (Scroll through 12 hours to get to AM/PM).

5.Press NEXT. Minute digits flash.

6.Press + or – to change minutes.

7.Press NEXT. Second digits flash.

8.Press + or – to set seconds to zero.

9.Press NEXT. Day of week flashes.

10.Press + to – to change day.

11.Continue pattern to set month, day of month, 12-hour or 24-hour time display, MM.DD or DD.MM date format, turn hourly CHIME on/off, turn BEEP on/off. If you select BEEP on, a beep will sound every time you push a button (except INDIGLO).

12.Press DONE to confirm and exit or NEXT to continue and set second time zone, if desired.

13.When in Time mode, press and hold START/SPLIT to “peek” at second time zone; hold for 4 seconds to switch time zones.

ALARM

Setting the ALARM is similar to setting TIME. Your watch model has three alarms. Follow below procedure to set each alarm.

1.Press MODE repeatedly until ALM1, ALM2, or ALM3 appears. Select alarm you want to set.

2.Press SET to set alarm.

3.Hour digits flash. Press + or – to change hour.

4.Press NEXT. Minute digits flash. Press + or – to change minutes.

5.Press NEXT. If in 12-hour format, AM/PM flashes. Press + or – to change.

6.Press NEXT. Press + or – to select DAILY, WEEKDAYS OR WEEKENDS.

7.Press DONE to confirm and exit.

8.Press Start/Split or Stop/Reset to arm or disarm alarm. When disarmed, OFF will be displayed. When armed, the alarm clock icon will appear .

9.The INDIGLO night-light and alarm icon flashes and an alert sounds

when the alarm goes off. Press any button to silence. A back up alarm will sound after five mintues if you don’t press any buttons.

TIMER

1.Press MODE repeatedly until TIMER appears.

2.Press SET. Hour digits flash.

3.Follow same pattern as setting TIME and ALARM to set hours (up to 24 hrs.), minutes, sec- onds, and select between REPEAT/AT END (timer counts down and then repeats) or STOP/AT END (the timer counts down and then stops).

4.Press DONE to confirm and exit.

5.Press START/SPLIT to start TIMER. Timer will continue to run even if you exit Timer mode. If REPEAT/END selected will flash. If STOP/END selected will flash.

6.An alarm melody will chime and INDIGLO® night-light flashes when the timer has reached zero or before it starts to count down again.

7.Press STOP/RESET to stop TIMER. Press again to reset to countdown time.

(continued on reverse)