Impex MWB 716 manual Assembly Instruction, Diagram

Page 5

ASSEMBLY INSTRUCTION

Tools Required Assembling the Machine: Two Adjustable Wrenches and Allen Wrenches.

NOTE: It is strongly recommended two or more people assembling this machine to avoid possible injury.

STEP 1 (See Diagram 1)

A.) Connect the two Rear Upright Beams (#1) by a Cross Brace (#2) in the mid-span. Align the holes and secure them with one Weight Post (#3), three M10 x 3 1/8” Carriage Bolts (#36), three ¾” Washers (#43), and three M10 Aircraft Nuts (#46) on each end of the Cross Brace.

B.) Insert two Crutches (#4) into the top openings on the Upright Beams. Secure them with two Lock Knobs (#20) through selected holes to obtain desired height of the Supports.

C.) Place Backrest Adjustment Bar (#14) between the two Upright Beams on the selected bar holder to obtain desired incline of Backrest

D.) Attach a Spring Clip (#21) onto each Weight Post.

DIAGRAM 1

4

Image 5
Contents Marcy Olympic Bench Before YOU Begin Table of ContentsImportant Safety Notice Hardware Pack Diagram Assembly InstructionDiagram Diagram Diagram Page KEY NO. Description Parts ListImpex INC