Impex MSS-7500 manual Assembly Instruction, See Diagram

Page 7

ASSEMBLY INSTRUCTION

Tools Required For Assembling the Machine: Two Adjustable Wrenches and Allen

Wrenches. NOTE: It is strongly recommended for two or more people to assemble this machine to avoid possible injury.

STEP 1 (See Diagram 1)

A.) Do not tighten the Nuts and Bolts until instructed to do so.

B.) Connect the two Upright Beams (#1) by a Cross Brace (#2) in the mid-span. Secure each end of the Cross Brace to Upright Beam with two M10 x 3 ¾” Carriage Bolts (#30), one 5 ½” Curved Bracket (#13), two Ø ¾” Washers (#36), and two M10 Aircraft Nuts (#38).

C.) Insert two Crutches (#7) into the openings on the two Upright Beams. Thread a M18 Lock Knob (#16) into the Upright Beam to lock each Crutch at desired height.

D.) Place the Backrest Adjustment Bar (#8) onto the selected peg to obtain the backrest incline.

DIAGRAM 1

6

Image 7
Contents Impex INC Weight BenchBefore YOU Begin Table of ContentsImportant Safety Notice Page Hardware Pack Page See Diagram Assembly InstructionSecurely tighten all Nuts and Bolts Diagram Diagram Page Parts List Description Impex INC