Impex MSS-7500 manual Diagram

Page 9

STEP 3 (See Diagram 3)

A.) Attach the Seat Bracket (#5) to the pivot on the Main Seat Support (#3). Attach the holes on the end of the two Backrest Supports (#6) to the Seat Bracket. Align the holes. Secure the two Backrest Supports, Seat Bracket together to the pivot with one M12 x 7” Hex Bolt (#26), two Ø 1” Washers (#37), and one M12 Aircraft Nut (#39). Do not over tighten the Nuts and Bolts. Make sure the Backrest Supports are able to swivel.

B.) Attach the Backrest Board (#11) to the Backrest Supports. Secure it with four M8 x 1 5/8” Allen Bolts (#34) and four Ø 5/8” Washers (#35).

C.) Place the Seat Pad onto the Seat Bracket. Secure it with four M8 x 1 5/8” Allen Bolts (#34) and four Ø 5/8” Washers (#35).

DIAGRAM 3

8

Image 9
Contents Impex INC Weight BenchBefore YOU Begin Table of ContentsImportant Safety Notice Page Hardware Pack Page See Diagram Assembly InstructionSecurely tighten all Nuts and Bolts Diagram Diagram Page Parts List Description Impex INC