Assembly Instruction

Tools Required Assembling the Machine: Two Adjustable Wrenches and Allen Wrenches

NOTE: It is strongly recommended two or more people assembling this machine to avoid possible injury.

STEP 1 (See Diagram 1)

A.)	Connect the Left Upright Beam (#1) and Right Upright Beam (#2) by a Cross Brace
	(#3) in the mid-span. Align the holes and secure each end of the Cross Brace with two
	M10 x 2 ¾” Carriage Bolts (#43), one 4 ¾” x 2” Bracket (#22), two ∅ ¾” Washers
	(#39), and two M10 Aircraft Nuts (#40).
B.)	Insert two Crutches (#7) into the top openings on the Upright Beams. Secure them with
	two Lock Knobs (#23) through selected holes to obtain desired height of the Supports.
C.)	Slide one Olympic Sleeve (#54) onto the weight post on Left Upright Beam (#1).
	DIAGRAM 1

ASSEMBLY INSTRUCTION