Impex MWB-760 manual Diagram

Page 6

STEP 2 (See Diagram 2)

A.) Slide the Sliding Block (#5) onto the Main Seat Support (#4). Align the holes and secure it with a Lock Knob (#23).

B.) Attach the Main Seat Support to the Cross Brace (#3). Secure it with two M10 x 2 ½” Carriage Bolts (#38), one 4 3/8” x 1 ¾” Bracket (#24), two ¾” Washers (#39), and two M10 Aircraft Nuts (#40).

C.) Attach the Leg Developer Holder (#8) to the Main Seat Support (#4). Secure it with two M10 x 2 ½” Carriage Bolts (#38), two ¾” Washers (#39) and M10 Aircraft Nuts (#40). Attach a Lock Knob (#23) to the hole on the Leg Developer Holder.

D.) Attach the Leg Developer (#9) to the open bracket on the Leg Developer Holder. Align the holes and secure it with an Axle (#27), two M10 x 5/8” Allen Bolts (#41), and two ¾” Washers (#39).

E.) Attach an Olympic Sleeve (#54) Spring Clip (#34) to the weight post on the Leg Developer. Attach a Spring Clip (#34) to the Sleeve.

F.) Attach the Curl Bar Handle Support (#13) to the open bracket on the Leg Developer. Lock it with a 3” L-shaped Lock Pin (#30) for Arm Curl exercise. Remove the Pin when using the Leg Developer.

DIAGRAM 2

5

Image 6
Contents Marcy Bench Toll-Free Customer Service Number Mon. Fri a.m. 5 p.m. PST Important Safety Notice Hardware Pack Assembly Instruction Diagram #40 Diagram Diagram Page Parts List Description Impex INC