STEP 2 (See Diagram 2)
A.) Do not tighten Nuts and Bolts until instructed to do so.
B.) Attach the Front Post (#6) to the Main Seat Support (#7). Secure it with one M10 x 4” Carriage Bolt (#32), one Ø ¾” Washer (#40), and one M10 Aircraft Nut (#43) from side. Secure it with two M10 x 2 1/8” Carriage Bolts (#34), two Ø ¾” Washers (#40), and two M10 Aircraft Nuts (#43) from top.
C.) Attach the Main Seat Support to the Cross Brace (#5). Secure it with four M10 x 2 3/8” Carriage Bolts (#33), one 5 ½” x 3” Bracket (#15), four Ø ¾” Washers (#40), and four M10 Aircraft Nuts (#43).
D.) Securely tighten all Nuts and Bolts installed in
DIAGRM 2
7