STEP 3 (See Diagram 3)
A.) Attach the Rear Stabilizer (#21) to the Cross Brace (#3). Secure it with two M10 x 3 ½” Carriage Bolts (#51), one 4 ¾” x 2” Bracket (#25), two Ø ¾” Washers (#64) and two M10 Aircraft Nuts (#66).
B.) Slide the Sliding Weight Post (#13) onto the Rear Vertical Frame (#7). Attach the Vertical Frame to the Rear Stabilizer. Secure it with two M10 x 2 ½” Allen Bolts (#56), four Ø ¾” Washers (#64), and two M10 Aircraft Nuts (#66). Slide two Ø 3” x ½” Spacers (#35) onto the weight posts. Attach two Olympic Sleeves (#14) onto the posts.
C.) Attach four Olympic Weight Posts (#15) to the Right & Left Supports (#5 & 6). Secure each Post with one M10 x 1 3/8” Allen Bolt (#59) and Ø ¾” Washer (#64). Slide four Olympic Sleeves (#14) onto the weight Posts. Attach six Spring Clips (#31) onto the Olympic Sleeves.
8