STEP 6 (See Diagram 6 & Cable Loop Diagram)
A.) | Attach one end of the 110” Butterfly Cable (#61) onto the hook on the Right Butterfly |
| Base (#7). |
B.) | Draw the Cable to the right Swivel Pulley Bracket (#26). |
C.) | Attach a Pulley to the bracket. Secure it with one M10 x 1 ¾” Allen Bolt (#71), two Ø ¾” |
| Washers (#84), and one M10 Aircraft Nut (#83). |
D.) | Draw the Cable around the Pulley then downward. Attach the Cable to an Angled Floating |
| Pulley Bracket (#25). Repeat C to install another Pulley. Let the Bracket hang for now. |
E.) | Pull the Cable around the Pulley then upward to the left Swivel Pulley Bracket. Repeat |
| Step C above to install a Pulley. |
F.) | Draw the Cable to the Left Butterfly Base (#8). Repeat A to secure the end of the Cable to |
| the Left Butterfly Base. |
17