ASSEMBLY INSTRUCTION
Tools Required Assembling the Machine: Two Adjustable Wrenches and Allen Wrenches
NOTE: It is strongly recommended two or more people assembling this machine to avoid possible injury.
STEP 1 (See Diagram 1)
A.) | Connect the Right Upright Beam (#1) and Left Upright Beam (#2) by a Cross Brace |
| (#3) in the |
| M10 x 2 ¾” Carriage Bolts (#43), one 4 ¾” x 2” Bracket (#22), two ∅ ¾” Washers |
| (#39), and two M10 Aircraft Nuts (#40). |
B.) | Insert two Crutches (#7) into the top openings on the Upright Beams. Secure them with |
| two Lock Knobs (#23) through selected holes to obtain desired height of the Supports. |
| DIAGRAM 1 |
4