STEP 4 (See Diagram 4)
A.) Attach the Seat Incline Adjustment (#19) to the two front holes on the bottom of Seat Bracket (#6). Place the Seat (#18) onto the Seat Bracket. Align the holes and secure it with four M8 x ¾” Allen Bolts (#35) and four ∅ 5/8” Washers (#36). Secure the position of the Incline Adjustment with a 4”
B.) Place the Backrest Board (#17) onto the Backrest Supports (#12). Secure it with four M8 x 1 5/8” Allen Bolts (#37) and ∅ 5/8” Washers (#36).
C.) Attach the Arm Curl Pad (#16) to the Arm Curl Stand (#10). Secure it with two M8 x ¾” Allen Bolts (#35) and ∅ 5/8” Washers (#36).
D.) Insert the Arm Curl Stand into the front opening on the Leg Developer Holder for Arm Curl exercises. Use the Lock Knob on the Leg Developer Holder to secure the position. When using the Leg Developer, remove the Arm Curl Stand and store it to the post on the base of Right Upright Beam.
DIAGRAM 4
7