JVC UX-QD70W, UX-QD70S manual Important for Laser Products / 镭射产品的重要说明

Warnings, Cautions and Others / 警告，注意及其他须知事项

CAUTION		注意
To reduce the risk of electrical shocks, fire, etc.:		为了减少触电、火灾等危险：
1.	Do not remove screws, covers or cabinet.	1.	请勿擅自卸下螺丝钉、盖子或机壳。
2.	Do not expose this appliance to rain or moisture.
		2.	请勿让本机受雨淋或置于潮湿环境中。

CAUTION — Fbutton!	注意－ F开关！
Disconnect the mains plug to shut the power off	想要完全关闭电源 （让 STANDBY 灯熄灭），须将电源插
completely (the STANDBY lamp goes off).	头从插座上拔下。
The F button in any position does not disconnect the
mains line.	无论 F键处于何种位置，主电路仍旧没有关闭。
• When the system is on standby, the STANDBY lamp	• 当系统处于待机状态时， STANDBY 灯点发红光。
lights red.	• 当系统处于开启状态时， STANDBY 灯点发绿光。
• When the system is turned on, the STANDBY lamp
lights green.	电源开关可用遥控器进行控制。
The power can be remote controlled.

CAUTION	注意
• Do not block the ventilation openings or holes.	• 切勿堵塞通风口或通风孔。
(If the ventilation openings or holes are blocked by a	（如果通风口或通风孔被报纸或布等物堵塞，热量将无
newspaper or cloth, etc., the heat may not be able to
	法散出。）
get out.)
• Do not place any naked flame sources, such as lighted	• 切勿在本系统上放置明火，如点燃的蜡烛。
candles, on the apparatus.	• 想要丢弃电池时，务必考虑环保问题以及严格遵守当地
• When discarding batteries, environmental problems
	关于处理废旧电池相关的法律规定和条例。
must be considered and local rules or laws governing
the disposal of these batteries must be followed strictly.	• 切勿让本机受雨淋、受潮湿、落上或溅上水滴，亦勿在
• Do not expose this apparatus to rain, moisture, dripping	本机上面放置盛满液体的容器，如花瓶。
or splashing and that no objects filled with liquids, such
as vases, shall be placed on the apparatus.

IMPORTANT FOR LASER PRODUCTS / 镭射产品的重要说明

1.CLASS 1 LASER PRODUCT

2.CAUTION: Do not open the top cover. There are no user serviceable parts inside the unit; leave all servicing to qualified service personnel.

3.CAUTION: Visible and invisible laser radiation when open and interlock failed or defeated. Avoid direct exposure to beam.

4.REPRODUCTION OF LABEL: CAUTION LABEL, PLACED INSIDE THE UNIT.

1.一级镭射产品。

2.注意：请勿打开顶盖板，本机内部没有用户可自行维修 的部件；所有维修工作应由有资格的人员完成。

3.注意：当内部锁定装置失效或者损坏后，打开盖板可能 会产生可见或不可见的镭射辐射。 应避免受到镭射光 束的直接照射。

4.标签的复制标示： 注意标签位于机内。

G-1