JVC UX-QD70S, UX-QD70W manual MD/Disc Messages, MD message Meaning Possible solution

MD/Disc Messages

MD message	Meaning		Possible solution
CANNOT ENTRY!	The track has already been in the selected	Select an appropriate track. (			page 64)
	group.
CANNOT FORM!	There is a group between the selected tracks.	Select appropriate tracks. (			page 63)
	There is no space for storing more group
CANNOT GROUP!	information.	You cannot form a group any more on the MD.
	(Group information is stored in the same area	(Erase the disc or track titles you do not need.)
	as title information.)
	You are trying to join tracks that have different
CANNOT JOIN	MDLP modes (SP/LP2/LP4), or tracks of only 8	The MD system restricts such operation.
	or less seconds (in SP mode (the standard ste-
	reo recording mode)).
CANNOT LISTEN	You are trying to adjust the volume during high	You cannot listen to sound from a CD during
	speed recording.	high speed recording.
CANNOT REC	You are trying to operate one-track-recording	Set PBC to off (		page 24).
	with a VCD or SVCD during PBC playback.
CANNOT TITLE	You are trying to enter a total of 1 793 or more	You cannot enter more titles.
	characters to an MD.
		Turn off the main unit. If the same message
READ ERROR	The main unit cannot read the MD.	appears again, the MD may be damaged.
		Replace the MD.
DISC FULL	There is no more space in the MD, or you are	Replace the MD. (		page 74).
	trying to record 255 or more tracks.
DISC PROTECTED	The MD is write-protected.	Close the write protect knob on the MD.
		(	page 75).
EMERGENCY	A malfunction occurred during recording.	Press	to quit recording, press			to
STOP		eject the MD, and then start recording again.
GROUP FULL	You are trying to form 100 or more groups.	You can form up to 99 groups.
GROUP TRACK	You are trying to form a group with a track	Select tracks that do not belong to any groups.
	already belonging to another group.	(	page 63)
LOAD ERROR	The MD is not properly loaded.	Insert the MD properly.
MD NO DISC	No MD is loaded.			–
	You are trying to record digital sound other than	Set digital output to linear PCM on the
NON-AUDIO		connected digital equipment. (Refer to the
CANNOT COPY	linear PCM from the connected equipment to an	instruction manual for the connected equipment
	MD.	for details.)
PLAYBACK DISC	You are trying to edit or record to an MD which	Replace the MD with a recordable MD.
	is designed only for playback.
SCMS CANNOT	You are trying to make a digital audio duplica-	Operate analog recording at normal speed.
COPY	tion of a CD-R or CD-RW.	(	page 51)
	You are trying to divide, join, or erase tracks	Edit the tracks on equipment compatible with
TRACK	which are recorded in the Net MD format.	Net MD.
PROTECTED	The tracks are write-protected by equipment	Edit the tracks with the equipment on which the
	other than this product.	tracks were recorded.
	You are trying to record a track with the high	Wait 74 minutes, or change from high speed
HCMS CANNOT	speed recording function within 74 minutes of
		recording to normal speed recording.
COPY	starting to record the same track with the high
		(	page 74)
	speed recording function.
BLANK DISC	There are no tracks in the MD.			–

Disc message	Meaning	Possible solution
CANNOT PLAY	You are trying to play back an unplayable disc or	Replace the disc.
	a disc that has many scratches.
NO DISC	No disc is loaded.	–
NO AUDIO	The disc may be an illegally copied disc.	You cannot listen to the disc.
LR ONLY	You are playing back a multi-channel track for	This is normal operation.
	which down-mix is prohibited.

Reference English

76