Using the Time Delay
The Bakehouse allows you to delay the completion of your bread by up to 15 hours, so you can wake up to the smell of freshly baked bread, or go out for the day while your Bakehouse does all the work.
Note: Do not use the Time Delay when the recipe has perishable ingredients such as milk, eggs or cheese as these may spoil.
1.Follow steps 1 – 5 on page 12.
2.Press 
and 
buttons until you reach the number of hours and minutes you want your bread to be ready. Press to add or minus time in 10 minute intervals.
3.Follow remaining steps 7 - 10 on page 12.
Note: You do not need to take into account the amount of time required to cook the program selected. This is automatically registered in the Bakehouse when it is selected.
Example
Before leaving for work at 8am, you decide to set the Time Delay so that the bread or selected program will be ready and completed by 6pm when you return home – which is 10 hours later. Set the timer for 10:00. This tells you that your bread or selected program will be complete in 10 hours. The Bakehouse will begin counting down and your selected program will be complete by 6pm.
Using the Bake Only menu
The BAKE ONLY menu offers the flexibility to vary time. Use this setting for an immediate baking process. This setting is useful if the crust is too light or if your bread is not quite done and requires more baking time. Check every few minutes. This setting will bake for up to 1 hour and 30 minutes and can be controlled manually by pressing the Start/ Stop button to stop the function at any time.
1.Press the BAKE ONLY button to activate this setting, no need to scroll through the Menu list. Adjust the amount of time you
need using the 
and 
buttons.
2.Press the START/ STOP button to begin baking.
This setting can also be used to complete the bread baking process in case of a power failure. If there has been a power failure, allow the dough to rise in the bread pan without power until it reaches 3/4 of the way up the bread pan. Reconnect electricity and press the BAKE ONLY button, and press Start. Note: You may need to wait
If you attempt to use this setting before the machine has cooled down, an error message may appear on the display.
14
