Sunbeam BM4500 manual The Control Panel, LCD Window, Timer Buttons, Loaf Size Button, Menu Button

The Control Panel

1. LCD Window

The window indicates the Menu setting, the Crust colour and the Loaf Size. The display will show the number of hours and minutes until the cycle is complete – “0:00”.

2. Timer Buttons

Use to adjust the BAKE ONLY time and to set the Delay Start timer.

Increases the time in 10 minute intervals

Decreases the time in 10 minute intervals

3. Loaf Size Button

Press the SIZE button to select the loaf size

–500g, 750g or 1.0kg. The default loaf size is 1.0kg.

4. Menu Button

Press the MENU button to select automatic breadmaking menus from (1) to (13). Each of these menus is explained further on page

6.Each time you press the MENU button it cycles through the menus from (1) to (13). The default menu is Menu 1. In addition, there is a 14th menu – Bake Only. To access the Bake Only setting, press the BAKE ONLY

1

2

3

4

5

6

7

button.

5. Bake Only Button

Use this button to activate the BAKE ONLY setting, then adjust the time needed by using the timer buttons.

6. Crust Button

Press the CRUST button to select the desired crust colour – Light, Medium or Dark. The default crust colour setting is Medium. For the Turbo menus, the crust is set to Medium.

7. Start / Stop Button

Press to commence selected setting or begin timer countdown for delay timer. To stop the operation or cancel a timer setting, press and hold for 2-3 seconds to clear.

5