Using your Bakehouse® continued
making time and the loaf size are also shown.
If you start the program, and then wish to change your selection, press and hold START/ STOP for several seconds. The timer will clear and you can begin again.
Note: During kneading cycle, yeast will activate and viewing window may begin to fog. This will clear eventually so you can view the bread making process.
Step 10 – Hot fresh crusty bread
When the bread is finished baking, the bread maker will beep and “0:00” will appear in the LCD window. Press START/ STOP, open the lid and remove the bread pan using oven mitts. Note: the bread pan and loaf are very hot. Be careful not to place these on any heat sensitive surface that may scorch.
Keep Warm
If the bread is not removed immediately after baking and START/ STOP is not pressed, the Bakehouse will automatically switch to a Keep Warm cycle for 60 minutes. The machine will beep and the display will read “0:00”. Warm air will circulate throughout the baking chamber to help reduce condensation. After 60 minutes on Keep Warm cycle, the machine will beep and the machine will go to a standby mode.
The bread can be removed from the baking chamber at the end of the cycle or any time during the Keep Warm cycle. Simply press the START/ STOP button for 3 seconds to end the Keep Warm period and turn off the bread maker at the powerpoint. Note: Keep Warm does not apply to the following cycles Dough, Artisan Dough, Jam and Bake.
Remove the bread
Allow the bread to cool in the bread pan for 10 minutes. Turn the bread pan upside down
and shake until the bread slides out. If necessary use a plastic spatula to loosen the bread from the sides of the pan. Place bread upright on a wire rack to cool for at least 10 minutes before slicing. Ensure the kneading blade is not in the bread. For easy slicing we recommend the use of an electric knife or a quality serrated bread knife.
Kneading Blade
The collapsible kneading blade is designed to stay in the bread pan, however it can sometimes stay in the bread. Ensure the kneading blade is not in the bread. If necessary, use the bonus blade hook to remove the blade from hot bread.
After using the Bakehouse, unplug the bread machine and allow to cool completely before cleaning for before commencing another program. If you attempt to use the Bakehouse too soon, it will beep and an error message will be displayed in the LCD window indicating the Bakehouse has not cooled sufficiently. Press the START/ STOP and wait until the machine has cooled.
13
