LP indicator setting, CD-R/CD-RW Recording

(Continued)

Recording Sound to MDs

Changing the display in the display window during recording

Press .

•Each time you press , the display changes as follows.

Elapsed playing time of the chapter or track being recorded

Remaining MD recording time

Recording disc track number



Recording MD track		Recording MD group
number		number
		(When tracks have not
		been recorded in a
		group, "- -" appears.)

Clock display

Things You Should Know about MD Recording

•It may be unlawful to record or playback copyright material without the consent of the copyright owner.

•You can record tracks having different MDLP modes onto an MD.

•You cannot use monaural extended recording, which enables you to record sound twice as long as with standard stereo recording. However, you can record a monaural source with the selected MDLP mode.

CAUTION

•Do not bump or sway the main unit during MD recording. Be especially careful while "WRITING" is displayed. Such movement may interfere with MD playback.

•You cannot play back tracks recorded in LP2 or LP4 with audio equipment that is not compatible with MDLP. If you attempt playback, "LP: " appears in front of the track title, and no sound is produced. When you play back tracks recorded in LP2 or LP4 with audio equipment that is com- patible with MDLP, "LP: " does not appear.

You can add or delete the "LP:" indicator.

( " 'LP: ' indicator setting" on the right)

"LP: " indicator setting

While recording is being paused, press .

•Each time you press , the display changes as follows.

: For adding "LP: " to the track title.

:For deleting "LP: " from the track title.

CD-R/CD-RW Recording

•When you record sound from a CD-R or CD-

RW onto an MD, pressing may dis- play "SCMS CANNOT COPY" in the display window, and digital recording may not be avail- able.

In such a case, set the recording speed to nor-

mal, hold down for 4 or more sec- onds. While "ANALOG REC?" is displayed,

press once again to select analog recording.

•You can record up to 254 tracks to an MD. If you try to record 255 or more tracks, "DISC FULL" appears.

•When you use a partially-recorded MD, this product searches for the blank portion and records the new tracks to that portion.

Unlike cassette tape recording, you cannot record over old tracks on an MD.

•Changing in sound volume and quality on this product during recording does not affect the recorded sound.

•Sound from a CD, VCD or SVCD is recorded as digital signals to an MD. Sound from the other sources are converted from analog signals to digital signals during recording.

•When you record a disc, track marks are auto- matically inserted between tracks. However, track marks may not be inserted when a DVD VIDEO or DVD AUDIO is recorded.

Recording Sound from Radio, Cassette Tape or Other Equipment

NOTE

•The recorded sound level is automatically adjusted.

•Sound-synchronized recording is used to record sound from other equipment (AUX). With this function, sound signals from the sound source are detected and recording starts automatically. When sound from the sound source pauses for 30 or more seconds, recording stops automati- cally. The blank time between the last recorded track and the next recorded track is approxi- mately 2 seconds.