Impex PHE 9000 manual MULTI-PURPOSE Bench Assembly Instruction

Page 22

MULTI-PURPOSE BENCH ASSEMBLY INSTRUCTION

Tools Required Assembling the Machine: Two Adjustable Wrenches and Allen

Wrenches. NOTE: It is strongly recommended this machine be assembled by two or more people to avoid possible injury.

STEP 1 (See Diagram 1)

A.) Attach the Main Frame (#1) to the Front & Rear Stabilizers (#2 & 3). Secure each end with two M10 x ¾” Allen Bolts (#30) and ¾” Washers (#36). Attach a Lock Knob (#18) to the Nut underneath the Main Frame (#1).

B.) Slide the Sliding Block (#8) onto the Incline Adjustment Bar (#9). Align the hole then secure it with a Lock Knob (#18) to hold the Sliding Block in position.

C.) Attach the Incline Adjustment Bar (#9) to the brackets on the Main Frame (#1). Secure each end with one M10 x 2 ½” Carriage Bolt (#29), ¾” Washer (#36), and M10 Aircraft Nut (#38).

D.) Cover the Stabilizer ends with four 2” Stabilizer End Caps (#28).

DIAGRAM 1

21

Image 22
Contents Powerhouse Elite Toll-Free Customer Service Number Mon. Fri a.m. 5 p.m. PST Important Safety Notice Smith Machine Hardeware Pack Smith Machine Hardeware Pack Smith Machine Hardeware Pack Smith Machine Assembly Instruction See Diagram DIAGRAM2 See Diagram Diagram Diagram Cable Loop Diagram See Diagram 6 & Cable Loop Diagram Diagram See Diagram 7 & Cable Loop Diagram See Diagram 8 & Cable Loop Diagram See Diagram 9 & Cable Loop Diagram Page Smith Machine ’tyMULTI-PURPOSE Bench Hardware Pack MULTI-PURPOSE Bench Assembly Instruction See Diagram Diagram Diagram Diagram Page MULTI-PURPOSE Bench Parts List Impex INC Info@impex-fitness.com