Impex PHE 2000 manual Diagram

Page 13

STEP 6 (See Diagram 6)

A.) Attach the Butterfly Base (#14) to the Vertical Frame (#5). Secure it with one 4 ¾” x 2” Bracket (#26), two M10 x 3 ½” Carriage Bolts (#71), two ¾” Washers (#87), and two M10 Aircraft Nuts (#89).

B.) Insert the Right Butterfly (#20) into the right pivot on Butterfly Base. Secure it with one M10 x ¾” Allen Bolt (#76) and 1 3/8” Washer (#66) from the bottom.

C.) Insert the Butterfly Handle (#13) into the pivot on the Right Butterfly. Secure it with one M10 x ¾” Allen Bolt (#76) and 1 3/8” Washer (#66).

D.) Repeat Procedures B and C above to install the other side.

DIAGRAM 6

12

Image 13
Contents Powerhouse Elite Toll-Free Customer Service Number Mon. Fri a.m. 5 p.m. PST Important Safety Notice Hardware Pack Hardware Pack Hardware Pack Assembly Instruction Diagram See Diagram Diagram Diagram Diagram Diagram Diagram Cable Loop Diagram See Diagram 8 & Upper Cable Loop Diagram Diagram Upper Cable Loop Diagram See Diagram 9 & Lower Cable Loop Diagram Diagram Lower Cable Loop Diagram See Diagram 10 & Butterfly Cable Loop Diagram Butterfly Cable Loop Diagram See Diagram11 Weight Resistance Chart ’ty Parts ListInfo@impex-fitness.com Impex INC