Impex PHE 2000 manual See Diagram 8 & Upper Cable Loop Diagram

Page 16

STEP 8 (See Diagram 8 & Upper Cable Loop Diagram)

A.) Attach the 154” Upper Cable (#34) to the opening on the front Upper Frame (#4). Make sure the ball stopper is underneath the Frame. Attach a Pulley (#45) to the Cable. Secure the Pulley with one M10 x 2 ½” Allen Bolt (#78), two 5/8” x 5/8” Pulley Bushings (#60), and one M10 Aircraft Nut (#89).

B.) Draw the Cable over the Pulley along the Upper Frame towards the back of the machine to the opening in the middle of Upper Frame. Repeat Procedure B above to install a Pulley.

C.) Draw the Cable around the Pulley then back to the upper open bracket on the back of Front Press Base (#10). Attach a Pulley to the bracket. Secure it with one M10 x 1 ¾” Allen Bolt (#80), two ¾” Washers (#87), and one M10 Aircraft Nut (#89).

D.) Draw the Cable around the Pulley then towards the upper opening on the Vertical Frame (#5). Repeat Procedure B above to install a Pulley.

E.) Draw the Cable around the Pulley and back to the lower open bracket on the back of Front Press Base (#10). Repeat Procedure C above to install a Pulley.

F.) Draw the Cable around the Pulley then to the lower opening on the Upper Frame. Repeat Procedure B above to install a Pulley.

G.) Draw the Cable underneath the Pulley then pull upward to the open bracket underneath the Upper Frame. Repeat Procedure C above to install a Pulley.

H.) Draw the Cable around the Pulley then downward. Attach a Pulley to the two Double Floating Pulley Brackets (#24). Repeat Procedure C above to install a Pulley. Let the Bracket hanging for now.

I.) Draw the Cable around the Pulley then upward to the opening on the back of Upper Frame. Repeat the Procedure C above to install a Pulley.

J.) Draw the Cable around the Pulley then downward to the Selector Rod (#41). Thread the Head Bolt at end of the Cable into the Selector Rod.

15

Image 16
Contents Powerhouse Elite Toll-Free Customer Service Number Mon. Fri a.m. 5 p.m. PST Important Safety Notice Hardware Pack Hardware Pack Hardware Pack Assembly Instruction Diagram See Diagram Diagram Diagram Diagram Diagram Diagram Cable Loop Diagram See Diagram 8 & Upper Cable Loop Diagram Diagram Upper Cable Loop Diagram See Diagram 9 & Lower Cable Loop Diagram Diagram Lower Cable Loop Diagram See Diagram 10 & Butterfly Cable Loop Diagram Butterfly Cable Loop Diagram See Diagram11 Weight Resistance Chart Parts List ’tyImpex INC Info@impex-fitness.com