Impex PHE 2000 manual Diagram

STEP 5 (See Diagram 5)

A.) Attach the Front Press (#11) to the pivot on the Front Press Base (#10). Align the holes and insert the Front Press Axle (#32) through the holes.

B.) Secure each end of the Axle with one M10 x ¾” Allen Bolt (#76) and ∅ 1 3/8” Washer (#66). Secure the Axle to the Front Press with two M8 x ¾” Screws (#88).

C.) Thread a Short T-shape Lock Pin (#52) into the hole on the Front Press. Use the Lock Pin to secure the desired Front Press exercise position.

D.) Attach the Butterfly Pulley Bracket (#17) to the Rear Base Frame (#2). Secure it with two M10 x 2 ¾” Carriage Bolts (#72), ∅ ¾” Washers (#87), and M10 Aircraft Nuts (#89).

DIAGRAM 5

11