STEP 4 (See Diagram 4) |
|
| |
A.) | Attach the Left Vertical Beam (#4) to the Left Base Frame (#3). Secure it with two | ||
| M10 x 2 ½” Carriage Bolts (#82), ∅ ¾” Washers (#93), and M10 Aircraft Nuts (#90). | ||
B.) | Attach the Left Upper Frame (#11) to the Top Socket Assembly (#7) and the Left | ||
| Vertical Beam. Secure the Frame to the Left Vertical Beam with one Bracket (#47), | ||
| two M10 x 2 ½” Carriage Bolts (#82), two ∅ | ¾” Washers (#93), and two M10 Aircraft | |
| Nuts (#90). Secure the Frame to the Top Socket Assembly with one Bracket (#47), | ||
| two M10 x 2 ½” Carriage Bolts (#82), two ∅ | ¾” Washers (#93), and two M10 Aircraft | |
| Nuts (#90). |
|
|
C.) | Attach the Left Seat Support (#14) to the Left Base Frame (#3) and the Left Vertical | ||
| Beam (#4). Secure it to the Left Base Frame with one M10 x 2 ½” Carriage Bolt | ||
| (#82), ∅ ¾” Washer (#93), and M10 Aircraft Nut (#90). Secure it to the Vertical | ||
| Beam with one Bracket (#47), two M10 x 2 ½” Carriage Bolts (#82), two ∅ | ¾” | |
| Washers (#93), and two M10 Aircraft Nuts (#90). |
| |
D.) | Attach the Leg Press Frame (#17) to the bracket on the Left Base Frame (#3). | ||
| Secure it with one M12 x 3” Allen Bolt (#77), two ∅ 1” Washers (#92), and one M12 | ||
| Aircraft Nut (#89). Do not over tighten the Nut and Bolt. Make sure the Leg Press | ||
| Frame is able to swivel. |
|
|
E.) | Attach the Leg Press Support Frames (#18) to both side of the Leg Press Frame | ||
| (#17). Secure them together with two M10 x 2 ½” Carriage Bolts (#82), ∅ | ¾” | |
Washers (#93), and M10 Aircraft Nuts (#90).
9