Impex SM-4008 manual Diagram Cable Loop Diagram, Brackets are able to swivel

Page 15

(#87). Push the Butterfly Arm Foam Roll (#64) to Right Butterfly. Repeat same step to install the Left Butterfly (#12).

B.) Insert two Swivel Pulley Brackets (#15) into the holes on the Butterfly Pulley Bracket (#14). Secure each Swivel Pulley Bracket with one M12 x 5” Hex Bolt (#100), two Ø 1” Washer (#108), and one M12 Aircraft Nut (#111). Do not over tighten the Nuts. Make sure the

Brackets are able to swivel.

DIAGRAM 5

CABLE LOOP DIAGRAM

Image 15

Contents Marcy Toll-Free Customer Service Number Mon. Fri a.m. 5 p.m. PST Important Safety Notice Smith Machine Hardware Pack Page Smith Machine Hardware Pack Smith Machine Hardware Pack Smith Machine Hardware Pack Smith Machine Assembly Instruction Diagram See Diagram Do not tighten all Nuts and Bolts until instructed to so Securely tighten all Nuts and Bolts installed in , ,See Diagram Diagram Brackets are able to swivel Diagram Cable Loop DiagramSee Diagram 6 & Cable Loop Diagram See Diagram 7-1, 7-2 & Upper Cable Loop Diagram Diagram Diagram Upper Cable #47 Loop Diagram See Diagram 8 & Cable Loop Diagram Page Diagram See Diagram Diagram See Diagram Page ’ty Smith Machine Parts ListMULTI-PURPOSE Bench Hardware Pack MULTI-PURPOSE Bench Hardware Pack Securely tighten all Nuts and Bolts MULTI-PURPOSE Bench Assembly InstructionSecurely tighten Nut and Bolt in a & B Do not tighten the Nut and Bolt yetDiagram Diagram Page MULTI-PURPOSE Bench Parts List SM-4008 Weight Resistance Chart Info@impex-fitness.com Impex INC