Impex SM-4008 manual See Diagram 7-1, 7-2 & Upper Cable Loop Diagram

Page 17

B.) Attach a Pulley (#62) and two Cable Retainers (#78) to the Bracket.

C.) Secure them with one M10 x 2” Allen Bolt (#94), two Ø ¾” Washers (#107), and one M10 Aircraft Nut (#110).

D.) Draw the Cable around the Pulley then downward. Attach an Angled Floating Pulley Bracket (#52) to the Cable. Repeat Procedure B above to install a Pulley with two Cable Retainers (#78). Draw the Cable around the Pulley then upward to the right Swivel Pulley Bracket. Let the Bracket hanging for now.

E.) Repeat Procedure C above to install a Pulley and Cable Retainers to the Bracket. F.) Draw the Cable around the Pulley then clip to the Right Butterfly (#13).

16

STEP 7 (See Diagram 7-1, 7-2 & Upper Cable Loop Diagram)

Image 17

Contents Marcy Toll-Free Customer Service Number Mon. Fri a.m. 5 p.m. PST Important Safety Notice Smith Machine Hardware Pack Page Smith Machine Hardware Pack Smith Machine Hardware Pack Smith Machine Hardware Pack Smith Machine Assembly Instruction Diagram See Diagram Do not tighten all Nuts and Bolts until instructed to so Securely tighten all Nuts and Bolts installed in , ,See Diagram Diagram Brackets are able to swivel Diagram Cable Loop DiagramSee Diagram 6 & Cable Loop Diagram See Diagram 7-1, 7-2 & Upper Cable Loop Diagram Diagram Diagram Upper Cable #47 Loop Diagram See Diagram 8 & Cable Loop Diagram Page Diagram See Diagram Diagram See Diagram Page ’ty Smith Machine Parts ListMULTI-PURPOSE Bench Hardware Pack MULTI-PURPOSE Bench Hardware Pack Securely tighten all Nuts and Bolts MULTI-PURPOSE Bench Assembly InstructionSecurely tighten Nut and Bolt in a & B Do not tighten the Nut and Bolt yetDiagram Diagram Page MULTI-PURPOSE Bench Parts List SM-4008 Weight Resistance Chart Info@impex-fitness.com Impex INC