JVC UX-V9MD manual Setting the Sleep Timer, Minute Snoozing, Setting the volume level

■5. Setting the volume level.

1.Press the TIMER/SNOOZE button on the Unit.

The volume level set by the previous timer setting blinks on the display.

2.Press the ¢ or 4 button to select the volume level.

-- : The current volume level will be used.

0 to 50: When the timer is turned on, the Volume will be automatically set to the selected level.

■6. Press the TIMER/SNOOZE button on the

Unit.

The timer setting is completed and the display returns to the dis- play before you set the timer. The timer indicator remains lit.

■7. Before turning off the System, prepare the music source selected in step 4.

TUNER : Tune in to the desired station.

TUNER REC : Tune in to the desired station and insert an MD

	for recording the station.
CD	: Insert a CD.
MD	: Insert an MD.

•Program Play on CD or MD is not possible for timer func- tion.

■8. Press the button to turn off the System.

To cancel the timer, press the TIMER/SNOOZE button. The Timer indicator goes out on the display.

To re-activate the cancelled timer, press the TIMER/ SNOOZE button to light the Timer indicator. Then, press the TIM- ER/SNOOZE button until the display returns to the original display. The Timer indicator should remain lit.

To confirm the timer settings, cancel the timer once by press- ing the TIMER/SNOOZE button. Then, press the TIMER/ SNOOZE button repeatedly, to see the current timer settings (ON time, OFF time, source, and volume).

To change the timer setting, repeat the setting procedure from the beginning.

•When the timer turns on, the Timer indicator starts blinking.

CAUTION: If the System is unplugged, or a power failure occurs, the timer setting will be lost. You will need to reset the clock first, then the timer.

5-Minute Snoozing —————————

When the timer turns on the music source you can, if you wish, ac- tivate the 5-minute snoozing function to temporarily stop playback.

Press the TIMER/SNOOZE button on the Unit.

The “SNOOZE” indicator lights up on the display and the power is turned off for five minutes for snoozing.

•If you press the TIMER/SNOOZE button 5 minutes or less before the timer reaches its OFF time, the power is turned accordingly, but it cannot be turned on again.

Setting the SLEEP Timer

Use the Sleep Timer to turn the System off after a certain number of minutes when it is playing. By setting the Sleep Timer, you can fall asleep to music and know that your System will turn off by itself rather than play all night.

■You can only set the Sleep Timer when the System is on and a source is playing.

■1. Play a CD, an MD, or tune in to the desired station.

■2. Press the SLEEP button.

The “SLEEP” indicator lights up.

■When the clock is not set, the “CLOCK” indicator and the “AD- JUST” indicator appear alternately on the display. Set the clock first.

■3. Set the length of time you want the source to play before shutting off.

•Each time you press the SLEEP button, it changes the number of minutes shown on the display in this sequence:

10 = 20 = 30 = 60 = 90 = 120 = Cancelled = (back to

the beginning)

After setting the number of minutes for the Sleep Timer, the display will stop blinking and return to the display as before setting the Sleep Timer. (The display is dimmed.)

The System is now set to turn off after the number of minutes you set.

To Confirm the Sleep Time

When the SLEEP button is pressed, the remaining sleep time is dis- played. Wait until the display returns to the original display.

To Cancel the SLEEP Timer Setting

Press the SLEEP button until the “SLEEP” indicator goes out on the display.

Turning off the System also cancels the SLEEP Timer.

■If you are setting the Daily Timer, the System will be turned on at the set time to wake you up.

23