1Unpacking and Placement
Unpacking Procedure
Note:
Box
Contents
Placing Your SXV2
Ventilation Requirements
6
The SXV2 is packaged for maximum protection. To open, sit the box upright and cut the reinforced tape at the top of the box. The product can now be removed.
Pull the grey foam end caps off either side of the unit and remove the black material covering.
The SXV2 Phono amplifier is now unpacked and ready for further installation.
Please retain all packaging material for future transport.
1 x SXV2 Phono Preamplifier
1 x Product manual
1 x Detachable AC power cord
3 x Performance analysis charts
The SXV2 should generally be placed close to your source equipment, thus keeping the interconnect cabling between the tone arm and phono stage as short as practical. This will reduce the systems susceptibility to radio frequency interference (RFI), electromagnetic interference (EMI) and the negative effects associated with long cables.
The SXV2 is a low power preamplifier. Ventilation requirements are not considered to be an important factor in product placement.
In the event that the SXV2 is to be incorporated into custom cabinetry, please refer to the dimensional information provided in the Specifications section of the manual (Chapter 12).