JVC MX-K30 manual Standard Recording, Press the REC START/STOP button on Unit

Page 53

Using the Cassette Deck (Recording)

Standard Recording

This is the basic method for recording any source. The System also has special ways for recording CD to tape, and tape to tape, which save you time and effort, as well as give you some special effects. However, when you need to add a selection to a tape you have made, or are combining selections from several sources on one tape, use the method described below; just substitute the source you want into this procedure, such as a tape in Deck A, a CD, or the Tuner. You can also record from an external equipment with this procedure.

To Record Any Sound Source to Tape

Follow these steps to record from any sound source onto a tape in Deck B.

1Insert a blank or erasable tape into the Deck B and wind past the tape leader.

2Insert a blank or erasable tape into the Deck B and wind past the tape leader.

3Press the CD REC START button on the Unit.

“CD REC” appears on the display and the “REC” indicator lights up. Then, the System begins CD Synchro Recording and the tracks on the CD are recorded on the tape.

When recording of the tracks of all CDs is finished, “CD REC FINISHED” scrolls on the display and the CD Player and Cas- sette Deck stop.

(When finished)

CD

REC START

•If the tab of the cassette tape on the Deck B is removed to prevent erasure or recording, "NO REC" will appear on the display.

•After the CD Player has played the entire CD or all the pro- grammed tracks, the tape automatically stops.

To stop at any time during the recording process, press the REC START/STOP button on the Unit or the 7 button. “CD REC FINISHED” scrolls on the display and the CD Player and Cassette Deck stop.

English

Tape travelling direction

2Prepare the source, by, for example, tuning in a radio station, loading CDs, or turning on connected equipment.

•For CD recording, see “CD Synchro Recording” mentioned below.

•For dubbing, see “Tape to Tape Recording (DUBBING)” described below.

3Press the REC START/STOP button on the

Unit.

The “REC” indicator lights up and the System begins record- ing.

The Tape indicator (3) blinks on the display.

•If the tab of the cassette tape on the Deck B is removed to prevent erasure or recording, "NO REC" will appear on the display.

•When making SLEEP timer settings while doing CD Syn- chro recording, set enough time to allow for the CD to fin- ish playing, otherwise the power will go off before recording is completed.

Tape to Tape Recording (DUB- BING)

Recording from one tape to another is called dubbing. You can dub tapes simply, with just a single button.

1Press the TAPE3 button, and then press the 7 button.

2Insert the source cassette you want to copy from into Deck A for playback.

To stop during recording, press the REC START/STOP but- ton on the Unit, or press the 7 button.

Recording an AM Station to Tape (Beat Cut)

When recording an AM broadcast, beats may be produced which are not heard when listening to the broadcast. If this happens, press the PROGRAM button on the Unit to eliminate the beats.

1Set to AM station and start recording.

2Press the PROGRAM button on the Unit to

eliminate the beats.

Each time you press the button, the display changes as shown below:

CUT 1= CUT 2 = (back to the beginning)

CD Synchro Recording

Everything on the CD goes onto the tape in the order it is on the CD, or according to the order you have set in a program.

3Insert a blank or erasable cassette you want to copy onto into Deck B for recording.

4Press the DUBBING button on the Unit.

Deck A and Deck B will start simultaneously and the "REC" indicator lights up.

During dubbing, the Deck indicators "A" and "B" light up al- ternately.

•If no tape is inserted into Deck A, "NO TAPE" will appear on the display.

•If no tape is inserted into Deck B, "NO TAPE" will appear on the display.

To stop dubbing, press the REC START/STOP button on the Unit or the 7 button.

•During dubbing, you can hear sound effects through the speakers or headphones. However, the sound is dubbed without sound effects.

1Prepare CDs. (See page 12.)

Press the CD1-3 button (that you want to make recording), and then press the 7 button.

•If you want to record specific tracks only, you need to pro- gram the tracks beforehand. (See page 14.)

18

Page 52 Page 54
Image 53
Page 52 Page 54
Contents MX-K30/MX-K10 For U.S.A Class 1 Laser Product How This Manual Is Organized FeaturesIntroduction Table of Contents How To Put Batteries In the Remote Control AccessoriesUsing the Remote Control Getting StartedUsing an FM 75-Ohm Antenna Cable not Supplied Connecting the FM AntennaUsing the Supplied Wire Antenna Rear Panel of the Unit Connecting the AM AntennaConnecting the Speakers Connecting to the Wall Outlet Connecting External EquipmentDemo Mode Compu PlayAdjusting the Volume Turning the Power On and OffTurning the System On Turning the System OffEntering the Number with the Remote Control Numeric Keys Selecting the Sound ModeFade-out Muting Fade Muting Reinforcing the Bass Sound Active Bass EXTuning In a Station Using the TunerSelect a station using one of the following methods One Touch RadioTo Change the FM Reception Mode Presetting StationsUsing the Unit Press the 4 or ¢ button to select the preset numberDisc Number indicator Lights all the time Using the CD PlayerAbout the Disc Indicator To Unload CDs To Load CDsExample of indication One Touch PlayTo Play CDs Basics of Using the CD Player- Normal PlayTo Select a Track Search PlayTo Make a Program Programming the Playing Order of the TracksTo Play the Program You Have Made To Exit and Re-enter Program PlayRepeating Tracks Random PlayTray Lock Function Locking the TrayPlaying a Tape Using the Cassette Deck Listening to a TapeTo Fast-Wind a Tape Close the cassette holder gentlyThings To Know Before You Start Recording Using the Cassette Deck RecordingCD Synchro Recording Standard RecordingTape to Tape Recording DUB- Bing To Record Any Sound Source to TapeListening to the External Equipment Using an External EquipmentSetting the Clock Using the TimersPress the CLOCK/TIMER button REC Recording TimerSetting the on time Example AM Setting the Daily TimerSetting the OFF time Example PM Selecting the music sourceTurning the Daily Timer On and Off Setting the REC Recording TimerSetting the volume level Press the % STANDBY/ON button to turn off the SystemSetting the on time you want the System to turn on Turning the REC Recording Timer On and OffSetting the OFF time you want the System to turn off Select the preset station for recordingTimer Priority Setting the Sleep TimerDuring playback a source, press the Sleep button Wait for 5 secondsCare And Maintenance Symptom TroubleshootingPossible Cause ActionToll Free 1 800 Do not service the television yourselfLimited Warranty Specifications Systeme DE Composants Compact For U.S.A Mises en garde, précautions et indications diversesProduit Laser Classe English Getting Started Using the Cassette Deck Listening to a TapeGetting Started Connecting the FM Antenna Connecting the AM Antenna Connecting External Equipment English Sound Mode FM/AM FM Mode Press the 4 or ¢ button to select Preset number Using the TunerUsing the CD Player Example of indication Normal Play Basics of Using the CD PlayerProgramming the Playing Order of the Tracks Random Play Tray Lock Function Using the Cassette Deck Listening to a Tape Using the Cassette Deck Recording Press the REC START/STOP button on Unit Preset DIS Demo Preset Cskip DIS Display Press the % STANDBY/ON button to turn on the SystemTimer Setting the REC RecordingTurning the REC Recording Timer On and Off Setting the Sleep Timer Care And Maintenance Mass SpecificationInput Sensitivity/Impedance 1 kHz EN, FR 0302NNMCREBET
Top Page Image Contents