| Using the Timers | |
Preparation for each music source: | Turning the Daily Timer On and Off | |
Perform the following operation according to the music source | Once you have set the Daily Timer, it is stored in memory. So, the | |
you have selected. Then, the System enters Volume Setting | ||
Daily Timer will be activated at the same time every day until it is | ||
mode. | ||
canceled. | ||
When selecting TUNER FM or TUNER AM: | ||
|
English
Press the ¢ or 4 button to select the preset station number, then press the SET button.
When selecting – CD – – –:
1.Press the ¢ or 4 button to select the disc number, then press the SET button.
Each time you press the button the disc number changes as follows:
– CD – – – =1CD – –
2.Press the ¢or 4button to select the track number, then press the SET button.
Please set the disc number to which you have listened at the last time. CD play does not start if you select other disc
number.
For example: 2CD – 12 (Disc number 2, Track number 12) Set Daily timer CD2 after playing in CD2.
If you set Daily Timer to other CD number after playing CD2, it will not play back at the setting time.
When selecting TAPE:
Be sure that the Deck indicator (“A” or “B”) is lit for the tape you want to play.
When selecting AUX:
Prepare the external equipment so that it will turn on at the ON time set by the System.
To allow this, the equipment should have the timer function.
6Setting the volume level.
Press the ¢ or 4 button to select the volume level. VOL – –
To cancel the Daily Timer temporarily:
1Press the CLOCK/TIMER button on the Unit repeatedly until the “DAILY” appears on the display.
2Press the CANCEL button on the Unit.
The “DAILY” indicator goes out and “OFF” appears on the display.
The Timer indicator ( 
) and “DAILY” indicator go out and the Daily Timer is canceled temporarily.
To activate the cancelled Daily Timer:
1Press the CLOCK/TIMER button on the Unit repeatedly until the “DAILY” appears on the
display.
The “DAILY” indicator blinks and the Timer indicator ( 
) lights up on the dispaly.
2Press the SET button on the Unit.
The “DAILY” indicator remains lit. Each setting already made appears on the display in the order of ON time, OFF time, mu- sic source and volume, and then the display returns to the orig- inal display.
CAUTION:
•If the System is unplugged, or a power failure oc- curs, the timer setting will be lost in a few days. You will need to reset the clock first, then the timer.
| DAILY |
|
|
| Setting the REC (Recording) |
7 Press the SET button. |
| Timer |
The timer setting is completed, and the “DAILY” indicator stops blinking and remains lit. Each setting you have made ap- pears on the display in the order of ON time, OFF time, music source and volume. Then, the display returns to the display be- fore you set the Timer.
8Press the % STANDBY/ON button to turn
off the System.
The Timer indicator ( 
) and “DAILY” indicator are lit on the display, showing that the Daily Timer is set to on.
To change the timer setting, repeat the setting procedure from the beginning.
When the timer ON-time comes:
The following operation will be automatically repeated every day.
•When the timer 
) blinks during timer operation.
•When the timer 
) remains lit on the display.
•If the System is already on when the timer
With the Recording Timer, you can make a tape of a radio broad- cast automatically whether or not you are home.
•You can set the REC Timer whether the System is on or off.
•The volume level is automatically set to MIN when REC Timer is used.
•Perform each setting within 35 seconds. Otherwise, set- ting will be cleared and the procedure must be repeated from the beginning.
•If you have made a mistake while setting the timer, press the CANCEL button on the Unit. However, this does not al- ways cancel the current setting. If the CANCEL button does not work, press the CLOCK/TIMER button on the Unit repeatedly until the display returns to the original dis- play, and start from the first step.
22