General Precautions

Chest Transmitter Battery Replacement

Step 1: Remove the transmitter from the belt.(Fig.1)

Step 2: Use a coin to unlock the battery door, and then replace the old battery inside with a new one. (Fig.2)

Step 3: Lock the battery door firmly into place making sure the O-ring seal does not get pinched or distorted.

Fig.1Fig.2

push push

UnlockLock

Do not operate buttons under water. Although your watch is water resistant, be sure that you do not operate its buttons under water as pressure can cause them to leak.

Dry off transmitter after use. The transmitter will automatically shut itself off once you have disconnected it from your chest. However, it is important to thoroughly dry it off after every use, since moisture in the electrodes can cause it to remain on longer.

Electrode precautions. Be sure not to excessively twist or bend the electrode portions of the chest transmitter (never bend backwards), especially when storing it. This can permanently damage their conductivity and cause mechanical damage to the internal circuit . Global Reset. If your watch should ever get stuck or act erratically due to dropping it, static shock or some other unforeseen reasons, this feature will allow you to reset the watch and return all settings back to their internal defaults. To perform this function, press and hold both buttons together for 3 seconds under any mode. The watch will enter the shelf mode, which is of the blank screen. Press any button to restart it.

Caution: Global Reset will CLEAR UP EVERYTHING that include your Personal Settings.