Acumen Ergo Basix manual Time Mode, Setting the time

Page 8

Time Mode

The watch firstly enter Time Mode when turned on.

Setting the time

1. From Time Mode press and hold MODE/SET button to enter the setting mode.

2. Hour (blinking)

- Press RESET// buton to adjust the value.

- Press MODE/SET button to proceed to the next item.

3. Minute (blinking)

- Press RESET// buton to adjust the value.

- Press MODE/SET button to proceed to the next item.

4.12/24 Hr. Time (blinking)

- Press RESET// buton to select 12 or 24 hour time.

- Press MODE/SET button to proceed to the next item.

5.Daily Alarm (blinking)

- Press RESET// buton to turn the alarm ON or OFF.

- Press MODE/SET button to proceed to the next item.

6. Alarm Hour (blinking) - Press RESET// buton to

adjust the value.

- Press MODE/SET button to proceed to the next item.

7.Alarm Minute (blinking)

- Press RESET// buton to adjust the valuse.

- Press MODE/SET button to exit the setting mode.

7

Image 8
Contents Ergo Basix Basix Congratulations Mission StatementErgo Basix Features Whats in Your PackagePage Operating Your Ergo Basix Modes of Operation Time Mode Setting the timeHeart Rate Mode Target Zone AlarmIn-Zone Goal Countdown Mode Upper Target Zone LimitCalorie Mode Determining Your Exercise FactorBattery Replacement Table of Exercise Factor SettingsGeneral Precautions Chest Transmitter Battery ReplacementTechnical Specifications Battery LifeDisplay Items Default Setting Range Technical Display GuideWarranty Service & Repair