~Powered subwoofer
From the powered | SUB - |
subwoofer | WOOFER |
OUT | |
(not supplied) |
|
The subwoofer connected can reproduce the bass sounds recorded in front left and right channels, but cannot reproduce the LFE signals in DVD
•Before plugging the unit to the main supply, make sure that the powered subwoofer is turned off.
ŸAM/FM antenna
To assemble the AM loop antenna
•Disconnect the supplied FM antenna, and connect to an outdoor FM antenna using a 75 Ω wire with coaxial type connector (IEC or DIN45325).
!TV/monitor
Connect only component cord at one time.
Red
Blue
To connect AM/FM antenna
AM loop antenna (supplied)
FM antenna (supplied)
Extend it so that you can obtain the best reception.
For better AM/FM reception
AM loop antenna (supplied)
Keep it connected.
Extend it horizontally.
FM outdoor antenna (not supplied)
Green | Component video cord |
| (not supplied) |
•To select progressive scanning mode (see page 15), use COMPONENT jacks.
Composite video cord (supplied)
•After connecting a TV, select the proper video signal mode according to the connection method. See “Changing the Scanning Mode” on page 15.
⁄Digital audio component
Protective cap
•Set “DIGITAL AUDIO OUTPUT” in the “AUDIO” menu correctly according to the connected digital audio equipment (see page 37). If the setting is incorrect, loud noise may be generated causing damage to the speakers.
•Digital audio signals are output from this System only when “DVD/CD” is selected as the source.
4