JVC 0404RYMMDWJEIN, LVT1140-007A manual Adjusting Sound, Adjusting the Equalization Patterns

Page 26

Adjusting Sound

Adjusting the Equalization Patterns

You can adjust the equalization patterns to your preference.

•Once you have made adjustment, it is memorized for each source.

Equalization adjustment—DEQ 63HZ, DEQ250HZ, DEQ 1KHZ, DEQ 4KHZ, DEQ16KHZ

You can adjust five frequencies (63 Hz, 250 Hz, 1 kHz,

4 kHz, 16 kHz) within the range of –8 dB to +8 dB in 2 dB steps.

•When adjustment is made, the DIGITAL EQ indicator lights up on the display.

To flat the equalization pattern, set all the frequencies to “0 (0 dB)” in step 4 of “Basic Procedure” (on page 23). The DIGITAL EQ indicator goes off from the display.

Only for RX-6042S:

For Surround and DSP modes (when the center speaker is connected)

CENTER TONE: Adjust the center tone. As the number increases, the dialogue becomes clearer so that the human voices change from soft to sharp. (Adjustable range: 1 to 5. Normally select “3.” )

Note:

This setting is common to all Surround modes, and is memorized

separately for DSP modes.

Note:

The equalization patterns affect the front speaker sounds only.

Adjusting the Speaker Output Levels

You can adjust the speaker output levels.

•Once you have made adjustment, it is memorized for each source.

You can also use the remote control for adjusting the speaker output level using the test tone.

•You can also adjust the effect level for DAP modes and Mono Film.

To adjust the speaker output level:

1Press SOUND.

The 10 keys are activated for sound adjustments.

TEST

FRONT L

FRONT R

EFFECT

CENTER

SUBWFR

 

SURR L

SURR R

LEVEL

 

TA/NEWS/INFO

 

REW

FF

REC PAUSE

CD-DISC

Adjustable speakers—SUBWFR LEVEL,

FRONT L LEVEL, FRONT R LEVEL, CENTER LEVEL, SURR L LEVEL, SURR R LEVEL

You can adjust the connected speakers’ output levels within the range of –10 dB to +10 dB.

Notes:

•If you have deactivated a speaker (see page 20), the output level adjustment for the speaker is not adjustable.

•For RX-6042S: All speakers’ output levels (except the subwoofer) are always adjustable for “DVD MULTI.”

Adjusting the Sound Parameters for the Surround and DSP Modes

You can adjust the Surround and DSP sound parameters to your preference. (For Surround and DSP modes, see pages 25 and 28.)

•When center speaker is set to “NONE,” you cannot adjust the center tone (CENTER TONE).

Adjustable parameters

You can adjust the following parameters:

For DAP modes and Mono Film

•Once you have made adjustment, it is memorized for each mode.

EFFECT: Adjust the effect level. As the number increases, the effect becomes stronger.

(Adjustable range: 1 to 5. Normally select “3.” )

For Pro Logic II Music only

PANORAMA CTRL: Select “PANORAMA ON” to add “wraparound” sound effect with side-wall image.

•To cancel it, select “PANORAMA OFF.”

2Press TEST to check if you can

hear the sounds through all the speakers at equal level. Test tone (TEST TONE) comes out of the speakers in the following order.

•No test tone comes out of the speakers for which the speaker setting is set to “NONE” (or “SUBWOOFER NO” for the subwoofer).

L (Left front) = C (Center) = R (Right front) =

RS (Right surround) = LS (Left surround) =

SW (Subwoofer) =(Back to the beginning)

3Adjust the speaker output level (–10 dB to +10 dB).

•For the left front speaker: Press FRONT L, then LEVEL +/–.

•For the center speaker: Press CENTER, then LEVEL +/–.

•For the right front speaker: Press FRONT R, then

LEVEL +/–.

•For the right surround speaker: Press SURR R, then LEVEL +/–.

•For the left surround speaker: Press SURR L, then LEVEL +/–.

•For the subwoofer: Press SUBWFR, then LEVEL +/–.

Note:

When you press LEVEL +/– once, the current level for the selected speaker appears on the display, and the test tone comes out of the selected speaker.

If no adjustment is done for about 4 seconds, the adjustment mode for the selected speaker is canceled.

4 Press TEST again to stop the test tone.

To adjust the effect level:

1Press SOUND.

The 10 keys are activated for sound adjustments.

2Press EFFECT repeatedly to select the effect level (EFFECT 1 to EFFECT 5).

The source indication resumes about 4 seconds after the adjustment.

24

Page 25 Page 27
Image 26
Page 25 Page 27
Contents RX-6042S RX-5042S LVT1140-007A aRX-6042S/RX-5042S Table of Contents Parts Identification Front PanelRemote Control DisplayRX-6042S Parts IdentificationRear Panel RX-5042SPutting Batteries in the Remote Control Before InstallationChecking the Supplied Accessories Connecting the FM and AM AntennasGetting Started Connecting the Speakers and SubwooferConnecting the speakers AM antenna connectionsPlacing speakers Connecting Audio/Video ComponentsConnecting the subwoofer Analog ConnectionsGreen Video component connectionsRed Blue When you connect a DVD player with stereo output jacks DVD playerDigital Connections Connecting the Power CordPlug the power cord into an AC outlet Basic Operations Daily Operational Procedure Selecting the Source to PlayTurning On the Power Sound Adjusting the VolumeBasic Operations Be sure to turn down the volume Selecting the Analog or Digital Input ModeListening with headphones Press Subwoofer OUT ON/OFF to cancel the subwoofer outputChanging the Display Brightness When Dolby Digital or DTS Surround is selectedTo select the analog input mode Press DimmerReinforcing the Bass Using the Sleep TimerBasic adjustment auto memory Muting the SoundReceiving Radio Broadcasts Tuning in to Stations ManuallyUsing Preset Tuning Select the band FM or AMWhile listening to an FM station, press FM Mode Press the 10 keys to select a preset channel numberSelecting the FM Reception Mode To tune in a preset stationChannel number Basic SettingsPress Quick Speaker Setup Press in Multi JOG Push SETEx. When setting Auto Surround to Auto Surr on Basic Setting ItemsPress Setting Setting the Speaker Distance Basic SettingsSetting the Speakers Setting the Bass SoundsSelect the playback sounds channel Setting for Easy and Effective Surround OperationsSelecting the Main or Sub Channel Select Auto Surr on to activate Auto SurroundThis setting is only for RX-6042S Setting the Digital Input TerminalsSetting the Component Video Input Select Vrtl SB on to activate Virtual Surround BackPress Adjust Adjusting SoundBasic Adjustment Items Ex. When adjusting the subwoofer level toAdjusting the Speaker Output Levels Adjusting SoundAdjusting the Equalization Patterns Dolby Digital*1 Using the Surround ModesReproducing Theater Ambience Introducing the Surround Modes Dolby Digital 5.1CHDTS 96/24 Using the Surround ModesDTS Digital Surround 3D Headphone Mode-3D H PhoneSelect and play any source excluding DVD Multi for RX-6042S Press Surround to activate the Surround modeActivating the Surround Modes Introducing the DSP Modes Using the DSP ModesReproducing the Sound Field Digital Acoustic Processor DAP modesTo adjust the effect level except All Channel Stereo, see To cancel the DSP modeMulti-channel digital signals Activating the DSP ModesPress the play 3 button on the CD player Compu Link Remote Control SystemRemote Control through the Remote Sensor on the Receiver Automatic Source SelectionConnections 2 Video Cable Connection AV Compu Link Remote Control SystemConnections 1 AV Compu Link Connection AV Compu Link Remote Control System Connecting procedurePress CD-DISC, then press Press CD, then press +10 Operating JVC’s Audio/Video ComponentsOperating Audio Components For RX-6042S Set TV/CATV selector to TV Operating JVC’s Audio/Video ComponentsOperating Video Components Try to operate your Catv converter by pressing Operating Other Manufacturers’ Video EquipmentRelease STANDBY/ON TV/CATV Try to operate your TV by pressingRelease STANDBY/ON DVD If there are more than one code listed for your brandRelease STANDBY/ON VCR Try to operate your VCR by pressingTroubleshooting Problem Possible Cause SolutionAmplifier SpecificationsOutput Power AudioAM tuner Main differences between the modelsFM tuner IHF GeneralAUDIO/VIDEO Control Receiver

LVT1140-007A, 0404RYMMDWJEIN specifications

The JVC LVT1140-007A,0404RYMMDWJEIN represents a compact yet powerful component in the realm of modern audio technology. Known for its impressive sound quality and user-friendly features, this device is a noteworthy option for audiophiles and everyday listeners alike.

One of the standout features of the JVC LVT1140-007A is its advanced audio processing capabilities. With built-in digital signal processing, it optimizes sound output across a range of frequencies, ensuring clarity and richness in both music and dialogue. This technology allows users to experience their favorite audio in a new light, providing depth that is often lost in lesser equipment.

Another significant characteristic is the device's compatibility with various audio formats. Supporting both traditional formats like MP3 and newer high-resolution options, the LVT1140-007A caters to a wide array of users. This flexibility ensures that whether you are playing a classic vinyl or streaming the latest digital release, you will enjoy consistent sound quality.

The LVT1140-007A also includes Bluetooth connectivity, enabling seamless integration with smartphones and tablets. This wireless feature not only enhances convenience but also allows for hassle-free streaming of music, podcasts, and other audio content directly from personal devices. Moreover, the inclusion of NFC technology makes pairing quick and effortless, reducing barriers to entry for new users.

Durability and design are other important aspects of the JVC LVT1140-007A. The device's robust construction ensures longevity while maintaining a sleek, modern aesthetic that complements any home decor. User interface is intuitive, with clearly labeled buttons and easy-to-read displays, making navigation simple even for those who may not be technically inclined.

In terms of connectivity options, the LVT1140-007A offers various ports for enhanced usability. Multiple inputs, including USB and AUX options, allow users to connect different audio sources with ease, ensuring versatility in playback sources.

In summary, the JVC LVT1140-007A,0404RYMMDWJEIN is a state-of-the-art audio solution that impresses with its advanced features, compatibility, and user-friendly design. Ideal for both casual listeners and serious audiophiles, it stands out as a reliable choice for anyone looking to enhance their auditory experience. The combination of audio processing technology, versatile connectivity, and lasting design makes it a top contender in the competitive audio equipment market.
Top Page Image Contents