JVC LVT1140-007A Connecting Audio/Video Components, Connecting the subwoofer, Placing speakers

Page 9

Connecting the subwoofer

You can enhance the bass by connecting a subwoofer.

Connect the input jack of a powered subwoofer to the rear panel, using a cable with RCA pin plugs (not supplied).

Connecting Audio/Video Components

When connecting individual components, refer also to the manuals supplied with them.

SUBWOOFER

OUT

Powered subwoofer

Placing speakers

Front speakers (L/R) and center speaker (C)

•Place these speakers at the same height from the floor, at or near ear level.

•Array across the front of the viewing area.

Surround speakers (LS/RS)

•Place these speakers alongside and slightly to the rear of (but not behind) the listening position; well above ear level (60 cm to 90 cm higher).

•Point these speakers directly across the listening area, but not at the listener’s ears.

Subwoofer (S.WFR)

•You can place it wherever you like since bass sound is non- directional. Normally place it in front of you.

L R

C

45– 60

S.WFR

LS

RS

After connecting the speakers, set the speaker installation information properly. You can use Quick Speaker Setup for it (see page 18).

Analog Connections

Audio component connections

Use the cables with RCA pin plugs (not supplied).

•Connect the white plug to the audio left jack, and the red plug to the audio right jack.

If your audio components have a COMPU LINK jack

See also page 30 for detailed information about the connection and the COMPU LINK remote control system.

CAUTION:

If you connect a sound-enhancing device such as a graphic equalizer between the source components and this receiver, the sound output through this receiver may be distorted.

CD player

CD player

 

R

 

CD

 

IN

To audio

L

 

output

 

Cassette deck/CD recorder

 

Cassette deck or CD recorder

To audio input To audio output

L

R

OUT

(REC)

TAPE

/CDR L

IN

(PLAY)

R

Note:

When connecting a CD recorder to the TAPE/CDR jacks, change the source name to “CDR,” which will be shown on the display when it is selected as the source. See page 14 for details.

7

Page 8 Page 10
Image 9
Page 8 Page 10
Contents LVT1140-007A a RX-6042S RX-5042SRX-6042S/RX-5042S Table of Contents Front Panel Parts IdentificationDisplay Remote ControlRear Panel Parts IdentificationRX-6042S RX-5042SChecking the Supplied Accessories Before InstallationPutting Batteries in the Remote Control Connecting the FM and AM AntennasConnecting the speakers Connecting the Speakers and SubwooferGetting Started AM antenna connectionsConnecting the subwoofer Connecting Audio/Video ComponentsPlacing speakers Analog ConnectionsVideo component connections Red BlueGreen DVD player When you connect a DVD player with stereo output jacksConnecting the Power Cord Plug the power cord into an AC outletDigital Connections Daily Operational Procedure Selecting the Source to Play Turning On the PowerBasic Operations Adjusting the Volume Basic OperationsSound Listening with headphones Selecting the Analog or Digital Input ModeBe sure to turn down the volume Press Subwoofer OUT ON/OFF to cancel the subwoofer outputTo select the analog input mode When Dolby Digital or DTS Surround is selectedChanging the Display Brightness Press DimmerBasic adjustment auto memory Using the Sleep TimerReinforcing the Bass Muting the SoundUsing Preset Tuning Tuning in to Stations ManuallyReceiving Radio Broadcasts Select the band FM or AMSelecting the FM Reception Mode Press the 10 keys to select a preset channel numberWhile listening to an FM station, press FM Mode To tune in a preset stationPress Quick Speaker Setup Basic SettingsChannel number Press in Multi JOG Push SETBasic Setting Items Press SettingEx. When setting Auto Surround to Auto Surr on Setting the Speakers Basic SettingsSetting the Speaker Distance Setting the Bass SoundsSelecting the Main or Sub Channel Setting for Easy and Effective Surround OperationsSelect the playback sounds channel Select Auto Surr on to activate Auto SurroundSetting the Component Video Input Setting the Digital Input TerminalsThis setting is only for RX-6042S Select Vrtl SB on to activate Virtual Surround BackBasic Adjustment Items Adjusting SoundPress Adjust Ex. When adjusting the subwoofer level toAdjusting Sound Adjusting the Equalization PatternsAdjusting the Speaker Output Levels Reproducing Theater Ambience Introducing the Surround Modes Using the Surround ModesDolby Digital*1 Dolby Digital 5.1CHDTS Digital Surround Using the Surround ModesDTS 96/24 3D Headphone Mode-3D H PhonePress Surround to activate the Surround mode Activating the Surround ModesSelect and play any source excluding DVD Multi for RX-6042S Reproducing the Sound Field Using the DSP ModesIntroducing the DSP Modes Digital Acoustic Processor DAP modesMulti-channel digital signals To cancel the DSP modeTo adjust the effect level except All Channel Stereo, see Activating the DSP ModesRemote Control through the Remote Sensor on the Receiver Compu Link Remote Control SystemPress the play 3 button on the CD player Automatic Source SelectionAV Compu Link Remote Control System Connections 1 AV Compu Link ConnectionConnections 2 Video Cable Connection Connecting procedure AV Compu Link Remote Control SystemOperating JVC’s Audio/Video Components Operating Audio ComponentsPress CD-DISC, then press Press CD, then press +10 Operating JVC’s Audio/Video Components Operating Video ComponentsFor RX-6042S Set TV/CATV selector to TV Release STANDBY/ON TV/CATV Operating Other Manufacturers’ Video EquipmentTry to operate your Catv converter by pressing Try to operate your TV by pressingRelease STANDBY/ON VCR If there are more than one code listed for your brandRelease STANDBY/ON DVD Try to operate your VCR by pressingProblem Possible Cause Solution TroubleshootingOutput Power SpecificationsAmplifier AudioFM tuner IHF Main differences between the modelsAM tuner GeneralAUDIO/VIDEO Control Receiver

LVT1140-007A, 0404RYMMDWJEIN specifications

The JVC LVT1140-007A,0404RYMMDWJEIN represents a compact yet powerful component in the realm of modern audio technology. Known for its impressive sound quality and user-friendly features, this device is a noteworthy option for audiophiles and everyday listeners alike.

One of the standout features of the JVC LVT1140-007A is its advanced audio processing capabilities. With built-in digital signal processing, it optimizes sound output across a range of frequencies, ensuring clarity and richness in both music and dialogue. This technology allows users to experience their favorite audio in a new light, providing depth that is often lost in lesser equipment.

Another significant characteristic is the device's compatibility with various audio formats. Supporting both traditional formats like MP3 and newer high-resolution options, the LVT1140-007A caters to a wide array of users. This flexibility ensures that whether you are playing a classic vinyl or streaming the latest digital release, you will enjoy consistent sound quality.

The LVT1140-007A also includes Bluetooth connectivity, enabling seamless integration with smartphones and tablets. This wireless feature not only enhances convenience but also allows for hassle-free streaming of music, podcasts, and other audio content directly from personal devices. Moreover, the inclusion of NFC technology makes pairing quick and effortless, reducing barriers to entry for new users.

Durability and design are other important aspects of the JVC LVT1140-007A. The device's robust construction ensures longevity while maintaining a sleek, modern aesthetic that complements any home decor. User interface is intuitive, with clearly labeled buttons and easy-to-read displays, making navigation simple even for those who may not be technically inclined.

In terms of connectivity options, the LVT1140-007A offers various ports for enhanced usability. Multiple inputs, including USB and AUX options, allow users to connect different audio sources with ease, ensuring versatility in playback sources.

In summary, the JVC LVT1140-007A,0404RYMMDWJEIN is a state-of-the-art audio solution that impresses with its advanced features, compatibility, and user-friendly design. Ideal for both casual listeners and serious audiophiles, it stands out as a reliable choice for anyone looking to enhance their auditory experience. The combination of audio processing technology, versatile connectivity, and lasting design makes it a top contender in the competitive audio equipment market.
Top Page Image Contents