JVC LVT1140-007A manual Operating JVC’s Audio/Video Components, Operating Audio Components

Page 35

Operating JVC’s Audio/Video Components

You can operate JVC’s audio and video components with this receiver’s remote control, since control signals for JVC’s components are preset in the remote control.

Operating Audio Components

IMPORTANT:

To operate JVC’s audio components using the supplied remote control:

You need to connect JVC’s audio components through the COMPU LINK (SYNCHRO) jacks (see page 30) in addition to the connections using cables with RCA pin plugs (see page 7).

Aim the remote control directly at the remote sensor on the receiver.

If you use the buttons on the front panel to choose a source, the remote control will not operate that source. To operate a source with the remote control, the source must be selected using source selection buttons on the remote control.

To operate the target component using the COMPU LINK remote control system, set the source name correctly if required. (See page 14.)

Refer also to the manuals supplied with your components.

Sound control section (Amplifier)

You can always perform the following operations:

STANDBY/ON

AUDIO:

 

Turn on or off the receiver.

VOLUME +/–:

Adjust the volume level.

MUTING:

Turn on or off sound muting.

ANALOG/DIGITAL: Switch the analog and digital input

 

alternately.

DIMMER:

Dim or brighten the display.

SLEEP:

Set the Sleep Timer.

SURROUND:

Turn on and select Surround modes.

DSP:

Turn on and select DSP modes.

SURROUND/DSP OFF:

 

Turn off the Surround and DSP mode.

BASSBOOST:

Only for RX-6042S: Turn on or off Bass

 

Boost.

After pressing SOUND, you can perform the following operations by using the 10 keys:

FRONT L then LEVEL +/–:Adjust the left front speaker output

level.

FRONT R then LEVEL +/–:Adjust the right front speaker output

level.

CENTER then LEVEL +/–: Adjust the center speaker output level.

SURR L then LEVEL +/–: Adjust the left surround speaker output level.

SURR R then LEVEL +/–: Adjust the right surround speaker output level.

SUBWFR then LEVEL +/–: Adjust the subwoofer output level.

EFFECT:

Adjust the effect level.

TEST:

Turn on or off test tone output.

Note:

After adjusting sounds, press the corresponding source selection button to operate your target source by using the 10 keys; otherwise, the 10 keys cannot be used for operating your target source.

Tuner

You can always perform the following operations:

FM/AM: Alternate between FM and AM.

After pressing FM/AM, you can perform the following operations on a tuner:

1 – 10, +10: Select a preset channel number directly. For channel number 5, press 5.

For channel number 15, press +10, then 5. For channel number 20, press +10, then 10.

FM MODE: Change the FM reception mode.

CD player

After pressing CD, you can perform the following operations on a CD player:

3:

Start playing.

4:

Return to the beginning of the current (or previous)

 

track.

¢:

Skip to the beginning of the next track.

7:

Stop playing.

8:

Pause playing. To resume, press 3.

1 – 10, +10: Select a track number directly. For track number 5, press 5.

For track number 15, press +10, then 5. For track number 20, press +10, then 10.

For track number 30, press +10, +10, then 10.

CD changer

After pressing CD-DISC, you can perform the following operations on a CD changer:

3:

Start playing.

4:

Return to the beginning of the current (or previous)

 

track.

¢:

Skip to the beginning of the next track.

7:

Stop playing.

8:

Pause playing. To resume, press 3.

1 – 6, 7/P:

Select the number of a disc installed in a CD

 

changer.

After pressing CD, you can perform the following operations on a CD changer:

1 – 10, +10: Select a track number directly. For track number 5, press 5.

For track number 15, press +10, then 5. For track number 20, press +10, then 10.

For track number 30, press +10, +10, then 10.

Example:

Selecting disc number 4, track number 12, and starting playback.

1 Press CD-DISC, then press 4.

2 Press CD, then press +10, 2.

Continued on the next page

33

Image 35
Contents LVT1140-007A a RX-6042S RX-5042SRX-6042S/RX-5042S Table of Contents Front Panel Parts IdentificationDisplay Remote ControlRX-5042S Parts IdentificationRear Panel RX-6042SConnecting the FM and AM Antennas Before InstallationChecking the Supplied Accessories Putting Batteries in the Remote ControlAM antenna connections Connecting the Speakers and SubwooferConnecting the speakers Getting StartedAnalog Connections Connecting Audio/Video ComponentsConnecting the subwoofer Placing speakersGreen Video component connectionsRed Blue DVD player When you connect a DVD player with stereo output jacksDigital Connections Connecting the Power CordPlug the power cord into an AC outlet Basic Operations Daily Operational Procedure Selecting the Source to PlayTurning On the Power Sound Adjusting the VolumeBasic Operations Press Subwoofer OUT ON/OFF to cancel the subwoofer output Selecting the Analog or Digital Input ModeListening with headphones Be sure to turn down the volumePress Dimmer When Dolby Digital or DTS Surround is selectedTo select the analog input mode Changing the Display BrightnessMuting the Sound Using the Sleep TimerBasic adjustment auto memory Reinforcing the BassSelect the band FM or AM Tuning in to Stations ManuallyUsing Preset Tuning Receiving Radio BroadcastsTo tune in a preset station Press the 10 keys to select a preset channel numberSelecting the FM Reception Mode While listening to an FM station, press FM ModePress in Multi JOG Push SET Basic SettingsPress Quick Speaker Setup Channel numberEx. When setting Auto Surround to Auto Surr on Basic Setting ItemsPress Setting Setting the Bass Sounds Basic SettingsSetting the Speakers Setting the Speaker DistanceSelect Auto Surr on to activate Auto Surround Setting for Easy and Effective Surround OperationsSelecting the Main or Sub Channel Select the playback sounds channelSelect Vrtl SB on to activate Virtual Surround Back Setting the Digital Input TerminalsSetting the Component Video Input This setting is only for RX-6042SEx. When adjusting the subwoofer level to Adjusting SoundBasic Adjustment Items Press AdjustAdjusting the Speaker Output Levels Adjusting SoundAdjusting the Equalization Patterns Dolby Digital 5.1CH Using the Surround ModesReproducing Theater Ambience Introducing the Surround Modes Dolby Digital*13D Headphone Mode-3D H Phone Using the Surround ModesDTS Digital Surround DTS 96/24Select and play any source excluding DVD Multi for RX-6042S Press Surround to activate the Surround modeActivating the Surround Modes Digital Acoustic Processor DAP modes Using the DSP ModesReproducing the Sound Field Introducing the DSP ModesActivating the DSP Modes To cancel the DSP modeMulti-channel digital signals To adjust the effect level except All Channel Stereo, seeAutomatic Source Selection Compu Link Remote Control SystemRemote Control through the Remote Sensor on the Receiver Press the play 3 button on the CD playerConnections 2 Video Cable Connection AV Compu Link Remote Control SystemConnections 1 AV Compu Link Connection Connecting procedure AV Compu Link Remote Control SystemPress CD-DISC, then press Press CD, then press +10 Operating JVC’s Audio/Video ComponentsOperating Audio Components For RX-6042S Set TV/CATV selector to TV Operating JVC’s Audio/Video ComponentsOperating Video Components Try to operate your TV by pressing Operating Other Manufacturers’ Video EquipmentRelease STANDBY/ON TV/CATV Try to operate your Catv converter by pressingTry to operate your VCR by pressing If there are more than one code listed for your brandRelease STANDBY/ON VCR Release STANDBY/ON DVDProblem Possible Cause Solution TroubleshootingAudio SpecificationsOutput Power AmplifierGeneral Main differences between the modelsFM tuner IHF AM tunerAUDIO/VIDEO Control Receiver

LVT1140-007A, 0404RYMMDWJEIN specifications

The JVC LVT1140-007A,0404RYMMDWJEIN represents a compact yet powerful component in the realm of modern audio technology. Known for its impressive sound quality and user-friendly features, this device is a noteworthy option for audiophiles and everyday listeners alike.

One of the standout features of the JVC LVT1140-007A is its advanced audio processing capabilities. With built-in digital signal processing, it optimizes sound output across a range of frequencies, ensuring clarity and richness in both music and dialogue. This technology allows users to experience their favorite audio in a new light, providing depth that is often lost in lesser equipment.

Another significant characteristic is the device's compatibility with various audio formats. Supporting both traditional formats like MP3 and newer high-resolution options, the LVT1140-007A caters to a wide array of users. This flexibility ensures that whether you are playing a classic vinyl or streaming the latest digital release, you will enjoy consistent sound quality.

The LVT1140-007A also includes Bluetooth connectivity, enabling seamless integration with smartphones and tablets. This wireless feature not only enhances convenience but also allows for hassle-free streaming of music, podcasts, and other audio content directly from personal devices. Moreover, the inclusion of NFC technology makes pairing quick and effortless, reducing barriers to entry for new users.

Durability and design are other important aspects of the JVC LVT1140-007A. The device's robust construction ensures longevity while maintaining a sleek, modern aesthetic that complements any home decor. User interface is intuitive, with clearly labeled buttons and easy-to-read displays, making navigation simple even for those who may not be technically inclined.

In terms of connectivity options, the LVT1140-007A offers various ports for enhanced usability. Multiple inputs, including USB and AUX options, allow users to connect different audio sources with ease, ensuring versatility in playback sources.

In summary, the JVC LVT1140-007A,0404RYMMDWJEIN is a state-of-the-art audio solution that impresses with its advanced features, compatibility, and user-friendly design. Ideal for both casual listeners and serious audiophiles, it stands out as a reliable choice for anyone looking to enhance their auditory experience. The combination of audio processing technology, versatile connectivity, and lasting design makes it a top contender in the competitive audio equipment market.