Assembly

Figure 7

INSERT THE AC ADAPTER INTO FRONT LOWER RIGHT HAND SIDE OF BIKE.

7.First, insert the Console Tube Cover(83) onto the Console Tube(35). Next, connect the Upper Electronic Wire(56) and the Lower Electronic Wire(57). Connect the Pulse Wires(54) to Pulse Wires(55). Last slide the Console Tube(35) onto the Main Frame(1) and secure in place using three Washers(18) and three Screws(12).

8.Plug the Upper Electronic Wire(56) into the back of the Console(36). Then, plug the Pulse Wires(55) with the pulse wires coming from the Console(36). After the wires are connected slide the Console(36) onto the Console Tube(35) and fix in place with four Screws(37).

Note: The four Screws(37) will already be installed in the back of the Console(36) when you remove it from the box.

Congratulations: You have completed the assembly of your new CardioMax 700r Recumbent bike.