Assembly

Figure 3

Figure 4

3.First, thread the Right Pedal(34) into the Right Crank Arm(30). Tighten the pedal securely using the wrench that has been provided. Next, find the Pedal Strap marked “R” and snap one of the 3 hole ends onto the inside of the pedal then snap the other 3 holed end onto the outside of the pedal. Repeat step to install the Left Pedal(33) into Left Crank(29).

Note: The Left Pedal(33) is reverse threaded. You will turn the pedal counter clock-wise to thread it into the Left Crank Arm(29).

4.Install Back Cushion(44) onto the Seat Frame(40) with four Hex Head Screws(48) and four Washers(49). Next, install Seat(45) onto the Seat Frame(40) using four Hex Head Screws(48) and four Washers(49).