CORD ASSEMBLY
Make sure the quick release upper cord
Lock the power cord into the locking notch base by pressing it into the quick release upper cord hook as shown. This helps keep the power cord out from under the
HANDI-MATE JR.®
For operation of
separate Owners Manual.
La_h_ __
vacuum cleaner agi- tator.
Power
TO INSERT HANDI-MATE JR®
Place the rear of the Handi-Mate Jr.® into
Wrap the power cord around the upper and lower cord hooks and lock the power cord plug onto the power cord.
Quick Release
Lower
the caddy. Rotate the
TO REMOVE HANDI-MATE JR.®
Rotate Handi-Mate Jr.® out of the caddy.
OPERATING INSTRUCTIONS
1. Turn the
Release
Upper Cord quick release
Hook upper cord hook to either side and down to release the
power cord.
l WARNING
•To reduce the risk of electric shock, this vacuum cleaner has a polarized plug (one blade is wider than the other).
•The plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified technician to install the proper outlet. Do not change the plug in any way.
2.Detach the power cord plug from the
power cord and pull the cord off the quick release upper cord hook. Be sure the power cord is still locked into the locking notch of the upper cord hook.
3.Be sure the vacuum cleaner has bag installed. See DUST BAG REPLACEMENT.
4.Plug the polarized power cord into a 120 Volt outlet located near the floor.
5.To replace cord, turn upper hook counter- clockwise pointing up, then wrap cord.
WARNING
Injury and Product Damage
Hazard
•DO NOT place hands or feet under the unit at any time.
•DO NOT use outlets above coun- ters. Damage from cord to items in
urroundin area could occur.
6