TO CLEAN AGITATOR
Note: In order to keep cleaning efficiency high and to prevent damage to your vacuum cleaner, THE AGITATOR MUST BE CLEANED EVERYI"IME THE BELT IS CHANGED.
The agitatormust be cleaned accordingto the followingschedule:
Vacuum | Use | Clean Aqitator | |
HEAVY |
| every week | |
(used | daily) |
|
|
MODERATE | every | month | |
(used |
|
| |
LIGHT |
| every | 2 months |
(used 1 time/week) |
|
| |
Remove anydirt or debris in the belt path area or in the agitatorarea.
Agitator Assembly
Carefully remove the brush end caps and
remove any string or debris located on the
agitator assembly or agitator shaft.
TO REPLACE BELT
Make sure that the carpet/bare floor selec- tor is in the carpet position.
Motor
Shaft
Belt | Carpet/Bare Floor |
Pulley Belt | Selector Shaft |
Loop the new belt on the motor shaft.
BELT ROUTING
Correct Routing of Belt
(Selector In Carpet Position)
., ) BElt / _; ) Carpet/Bare
Agit_at__t;rFlOorPedal
Carpet/Bare Floor Shaft
Selector Shaft
Incorrect Routing of Belt
(Belt on Selector Shaft)
..I ) Floor Pedal
Carpet/Bare Floor Shaft
Selector Shaft
Incorrect Routing of Belt
(Selector in Bare Floor Position)
I' | '4 /'} Floor Pedal |
AgitatorBelt Carpet/Bare Floor Selector Shaft
17
