Kenmore 116.35623 Re-fasten, the furniture, guard retain, ers to the, posts on, both sides of

NOTE: See PARTS AND FEATURES for belt number.

Loop the other end of the belt on the belt pulley on the agitator.

Insert the agitator by placing the rounded

portion of the end cap down into the slot in the nozzle base.

Note: It may be necessary to hold the fur- niture guard out of the way in order to

allow proper insertion of the agitator into the nozzle base.

Agitator		Nozzle
		Base
Furniture		Base
Guard	End	Slot
	Cap

Note: Care must be taken due to the belt tension during reassembly.

Press firmly,

checking to see that

each end is

completely inserted.

Check to see that the belt is centered on the belt pulley. Turn the agitator with your fingers to see that it turns freely.

To re-attach

the agitator cover, insert

the six (6) tabs into the

six slots along the

front edge of the nozzle

Lower the agitator cover to its original position. After positioning the agitator cover, push forward on the two (2) locking tabs in order to ensure that they are securely in place.

Re-fasten	Furniture
the furniture	Guard
guard retain-	Retainer
ers to the
posts on
both sides of
the agitator	Agitator
cover.	Cover

Note: If the agitator cover is not installed correctly,you may experience a loss of performance and possible agitator vibra- tion, etc.

Headlight

PRre

Lock Tabs

Securely In

Place

Make sure the headlight wires are tucked securely in place.

Replace the

nozzle cover and secure

the latches.

Nozzle

Cover

base.

Tabs/

Slots

18